User's Manual
Table Of Contents
- XS-3900 User’s Guide
- Front Matter
- Table of Contents
- List of Figures
- Introduction
- Installing the XS-3900
- Installation Prerequisites
- Planning Your Installation
- Installation Workflow
- Unpacking the XS-3900
- Installing the XS-3900
- Powering Up the XS-3900
- Establishing Communication with the Array
- Performing the Express Setup Procedure
- The Web Management Interface
- Configuring the XS-3900
- Logging In
- Making Configuration Changes to the XS-3900
- Array Status
- Express Setup
- Network Interfaces
- IAP Interfaces
- SSID Management
- Security
- Users
- Services
- Software
- Tools
- Event Log
- The Command Line Interface
- Establishing a Secure Shell (SSH) Connection
- Basic Commands
- Command Modes
- Selecting Interfaces
- Command Line Keywords
- Interface Selection
- Interface Configuration
- Radio Configuration
- Beacon Information
- System Administration
- System Testing
- Security
- Station Timeouts
- SSID Configuration
- DNS Configuration
- NTP Configuration
- DHCP Configuration
- Syslog Configuration
- SNMP Configuration
- Filters
- Radius Configuration
- Reports
- Data Handling
- Data Clearance
- Show Information
- Remove Configuration
- Help
- Appendix A: Quick Reference Guide
- Appendix B: Technical Support
- Glossary of Terms
- Index
Wireless LAN Array
The Command Line Interface 161
client
dot11
statistics
Show Information
The following keywords are used for displaying system information.
adjacent-ap
carrier-busy
Description: Designates a client station to deauthenticate
Usage: clear { dot11 { client <stamacaddr> }}
Parameters: <stamacaddr> specifies the MAC address of a client station
you want to disassociate
Description: Designates a wireless interface
Usage: clear { dot11 { client <stamacaddr> }}
Parameters: <stamacaddr> specifies the MAC address of a client station
you want to disassociate
Description: Designates accumulated counters, such as amount of data
transmissions
Usage: clear { dot11 { statistics <statmac> }}
Parameters: <statmac> specifies the MAC address of a client station from
which you want clear all statistical data
Description: Select all adjacent APs that are members of a WDS roaming
neighborhood
Usage: show { dot11 { adjacent-ap }}
Parameters: none
Description: Show the percentage of CCA that is busy
Usage: show { carrier-busy }
Parameters: none