User's Manual
Table Of Contents
- XS-3900 User’s Guide
- Front Matter
- Table of Contents
- List of Figures
- Introduction
- Installing the XS-3900
- Installation Prerequisites
- Planning Your Installation
- Installation Workflow
- Unpacking the XS-3900
- Installing the XS-3900
- Powering Up the XS-3900
- Establishing Communication with the Array
- Performing the Express Setup Procedure
- The Web Management Interface
- Configuring the XS-3900
- Logging In
- Making Configuration Changes to the XS-3900
- Array Status
- Express Setup
- Network Interfaces
- IAP Interfaces
- SSID Management
- Security
- Users
- Services
- Software
- Tools
- Event Log
- The Command Line Interface
- Establishing a Secure Shell (SSH) Connection
- Basic Commands
- Command Modes
- Selecting Interfaces
- Command Line Keywords
- Interface Selection
- Interface Configuration
- Radio Configuration
- Beacon Information
- System Administration
- System Testing
- Security
- Station Timeouts
- SSID Configuration
- DNS Configuration
- NTP Configuration
- DHCP Configuration
- Syslog Configuration
- SNMP Configuration
- Filters
- Radius Configuration
- Reports
- Data Handling
- Data Clearance
- Show Information
- Remove Configuration
- Help
- Appendix A: Quick Reference Guide
- Appendix B: Technical Support
- Glossary of Terms
- Index
Wireless LAN Array
162 The Command Line Interface
controllers
dot11
dot11radio
file
flash
hosts
info
Description: Display radio baseband information
Usage: show { controllers { dot11radio <contnum> }}
Parameters: <contnum> specifies the radio ID or number (1 to 16)
Description: Select the wireless interface
Usage: show { dot11 { adjacent-ap }}
Parameters: none
Description: Select a specific radio
Usage: show { controllers { dot11radio <contnum> }}
Parameters: <contnum> specifies the radio ID or number (1 to 16)
Description: Display the individual file size
Usage: show { file { info <showfnm> }
Parameters: <showfnm> specifies the individual file name
Description: Display the flash size and free space
Usage: show { flash }
Parameters: none
Description: Display cached host names
Usage: show { hosts }
Parameters: none
Description: Displayinformation that is specific to an individual file name
Usage: show { file { info <showfnm> }
Parameters: <showfnm> specifies the individual file name