User's Manual Part 2

Wireless LAN Array
206 Appendix A: Servicing the Xirrus Array
4. Reinstall the access panel (refer to “Reinstalling the Access Panel” on
page 204).
Replacing the Main System Memory
Use this procedure when you want to replace the main system memory.
1. Remove the access panel (refer to “Removing the Access Panel” on
page 202).
2. Remove the DIMM memory module, taking care not to “wiggle” the
module and risk damaging the connection points.
Figure 120. Removing the DIMM Memory Module
3. The removal procedure is complete. You can now reinstall the DIMM
memory module (or install a new module). Ensure that the DIMM
memory module is seated evenly and the locking tabs are in the upright
position.
4. Reinstall the access panel (refer to “Reinstalling the Access Panel” on
page 204).
#
The DIMM memory module is keyed to fit in its socket in one direction only.
DIMM memory module
Push down on
the two locking
tabs to release
the DIMM
memory module