User's Manual Part 2

Wireless LAN Array
138 Configuring the Xirrus Array
Procedure for Configuring SNMP
1. Enable SNMP: Choose Yes to enable SNMP functionality, or choose No
to disable this feature.
2. SNMP Link IP Address: Enter the IP address of the SNMP link.
3. Trap Port: Enter the trap port.
4. Community String: Enter the community string.
5. Send Auth Failure Traps: Choose Yes to log authentication failure traps
or No to disable.
6. Click on the Apply button to apply the new settings to this session.
7. Click on the Save button to save your changes (otherwise your new
settings will not take effect).
#
SNMP must be enabled on each array when used with the XM-
3300 Management Platform.