User's Manual Part 2

Wireless LAN Array
Configuring the Xirrus Array 141
Procedure for Configuring System Tools
1. System Configuration Reset: Click on the Reset button to reset the
system’s current configuration settings to the factory default values—all
previous configuration settings will be lost.
2. System Reboot: Click on the Reboot button to reboot the system—you
must reboot the Array.
3. Software Upgrade: Enter the filename and directory location (or click on
the Browse button to locate the software upgrade file), then click on the
Upload button to upload the new file to the Array.
4. Config Update: This field allows you to define the path to a configuration
file (one that you previously saved—see next step). Click on the Browse
button if you need to browse for the location of the file, then click on the
Upload button to update your configuration settings.
5. Config Download: Click on this link to save the Array’s current
configuration settings to a file (that you can upload at a later date). The
system will prompt you for a destination for the file.
6. System Tools: Choose Trace Route or Ping.
7. IP Address: Enter the IP address of the target device.
8. Timeout: Enter a value (in seconds) before the action times out.
9. Click on the Execute button to perform the test. Results are displayed in
the Output frame.