User's Manual Part 2

Wireless LAN Array
The Command Line Interface 161
PARAMETERS
on Enable the DHCP server
off Disable the DHCP server
start-ip-range Starting IP address for the lease pool
end-ip-range Ending IP address for the lease pool
default-lease Default lease period (in minutes), if one is not
requested
max-lease Maximum lease period allowed
show Display the current DHCP server settings
D
EFAULTS
Default lease time 300
Maximum lease time 300
U
SAGE GUIDELINES
None.
E
XAMPLE
To set the IP address range for the local DHCP server and enable the server,
type:
Xirrus_WLAN_Array(config)# dhcp-server
Xirrus_WLAN_Array(config-dhcp-server)# start-ip-range 192.168.1.100
end-ip-range 192.168.1.200
Xirrus_WLAN_Array(config-dhcp-server)# show
DHCP Server Settings Summary
----------------------------
State disabled
Address range start 192.168.1.100
Address range end 192.168.1.200
Default lease time 300
Maximum lease time 300
S
EE ALSO
None.