User's Manual Part 2

Wireless LAN Array
The Command Line Interface 171
USAGE GUIDELINES
Setting Gigabit2 Interface parameters will automatically set the Gigabit1
parameters to the same values for failover purposes.
E
XAMPLE
To set the IP address of the gigabit Ethernet interfaces:
config-interface gig2
((config-gig1/2)# ip addr 192.168.39.186 mask 255.255.255.0
Figure 104. CLI: Setting the IP Address for the Gigabit 2 Interface
SEE ALSO
config-interface gig1
config-interface eth0