User's Manual Part 2

Wireless LAN Array
The Command Line Interface 181
PARAMETERS
frag-threshold 802.11b/g fragmentation threshold packet size
above which a packet will be fragmented
rts-threshold 802.11b/g RTS threshold packet size above
which an RTS is issued before sending
auto_channel Automatically assign channels to 802.11b/g IAPs
rates Set allowed 802.11b/g bit rates
basic Set 802.11b/g basic (required) rates
supported Set 802.11b/g supported (accepted) rates
defaults Set default 802.11b/g rates
optimize_range Set 802.11b/g rates for best range
optimize_throughput Set 802.11b/g rates for best throughput
all_down Shut down (disable) all 802.11b/g IAPs
all_up Bring up (enable) all 802.11b/g IAPs
preamble Set 802.11b preamble length
short_preamble Enable cck short preamble (56 sync bits)
long_preamble Use only cck long preamble (128 sync bits)
slot_time Set 802.11b/g slot time
short_slot Enable short slot time (9 us)
long_slot Use only long slot time (20 us)
dot11g_protect Enable or disable 802.11g protection
dot11g_only Enable or disable 802.11g only mode
on Enable 802.11g only (or protection) mode
off D i s a b l e 8 0 2 . 1 1 g o n l y ( o r p r o t e c t i o n ) m o d e
cellsize Cell size setting
small Small cell size
medium Medium cell size
large Large cell size
rx-threshold Deferred threshold (receive sensitivity)
tx-power Maximum transmit power
D
EFAULTS
None.
U
SAGE GUIDELINES
None.
E
XAMPLE
None.