Data Sheet

© 2018 Riverdi Page 13 of 24 www.riverdi.com
RiTFT-35 series
LCD TFT Datasheet Rev.1.0
11.2.2 For resistive touch panel
Note 1: Force test condition, Input DC 5V on X direction, drop off Polyacetal Stylus (R0.8), until output
voltage stabilize, then get the R8.0mm Silicon rubber and do finger Activation force test. Next step, 9
points.
ITEM
VALUE
UNIT
REMARK
Min.
Typ.
Max.
Activation Force
20
-
100
gf
Note 1
Durability-Surface Scratching
Write 100,000
-
-
characters
Note 2
Durability-Surface Pitting
1,000,000
-
-
touches
Note 3
Surface Hardness
3
-
-
H
JIS K5400
12 INSPECTION
Standard acceptance/rejection criteria for TFT module.
12.1 Inspection condition
Ambient conditions:
• Temperature: 25±°C
• Humidity: (60±10) %RH
• Illumination: Single fluorescent lamp non-directive (300 to 700 lux)
Viewing distance:
35±5cm between inspector bare eye and LCD.
Viewing Angle:
U/D: 45°/45°, L/R 45°/45°