8QT Double Fish Fryer Assembly, Use and Care Model: TF2014501-RG-00 For Outdoor Use Only Tools required: Phillips screwdriver / Adjustable wrench To installer or person assembling this appliance: Leave this manual with this appliance for future reference. This instruction manual contains important information necessary for the proper assembly and safe use of the appliance. Read and follow all warnings and instructions before assembling and using the appliance.
DANGER If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. If odor continues, keep away from the appliance and immediately call your fire department. Failure to follow these instructions could result in fire or explosion which could cause property damage, personal injury or death. DANGER 1. Never operate this appliance unattended. 2. Never operate this appliance within 10 feet or 3m of any other gas cylinder. 3. Never operate this appliance within 25 feet 7.
WARNING Combustion by-products when using this product contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. WARNING This Appliance is not intended for commercial use. Safety Symbols The symbols and boxes shown below explain what each heading means. Read and follow all of the messages found throughout the manual. DANGER Danger: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING 1. 2. 3. 4. 5. 6. 7. 8. 9. Never leave the appliance unattended. Keep children and pets away from the appliance at all times. The use of alcohol, prescription or non-prescription drugs may impair the consumer’s ability to properly assemble or safely operate the appliance. This appliance is for OUTDOOR USE ONLY. DO NOT use in building, garage or any other enclosed area. This appliance is not intended to be installed in or on recreational vehicle and/or boats.
10. 11. 12. 13. 14. (6) This is the amount of cooking oil the vessel is to be filled with to cook the food product. Introduction of water or ice from any source into the oil/grease may cause overflow and severe burns from hot oil and water splatter. When frying with oil/grease, all food products MUST be completely thawed and towel dried before being immersed in the fryer. Do not place empty cooking vessel on the appliance while in operation.
appliance is not in use, turn off control knob and LP tank valve. Never move appliance while in operation or still hot. If you notice grease or other hot material dripping from appliance onto valve, hose or regulator, turn off gas supply at once. Determine the cause, correct, clean and inspect valve, hose and regulator before continuing. Perform a leak test. The regulator may make a humming or whistling noise during operation. This will not affect safety or use of appliance.
Never drop food or accessories into hot cooking liquid. Lower food and accessories slowly into the cooking liquid in order to prevent splashing or overflow. When removing food from the appliance care should be taken to avoid burns from hot cooking liquids. DANGER The safety relief valve on the LP tank could activate releasing gas and cause an intense fire with risk of death or serious injury. Therefore, follow instructions bulleted below exactly.
LP tank valve must have: Type 1 outlet compatible with regulator or appliance. Safety relief valve. UL listed Overfill Protection Device (OPD). This OPD safety feature is identified by a unique triangular hand wheel. Use only tanks equipped with this type of valve. LP tank must be arranged for vapor withdrawal and include collar to protect LP tank valve. LP (Liquefied Petroleum Gas) LP gas is non toxic, odorless and colorless when produced.
Use a clean paint brush and 50/50 soap and water solution. Use mild soap and water. Do not use household cleaning agents. Damage to gas train components can result. Brush soapy solution onto all weld seams and entire valve area. WARNING If “growing” bubbles appear, do not use or move the LP tank. Contact an LP gas supplier or your file department. Connecting Regulator to the LP Tank 1. Place LP tank on a secure, level, and stable surface. 2. Turn control knob to the OFF position. 3.
WARNING Do not insert any tool or foreign object into the valve outlet or safety relief valve. You may damage the valve and cause a leak. Leaking propane may result in explosion, fire, severe personal injury, or death. Never attempt to attach this appliance to the self-contained LP gas system of a camper or trailer or motor home. The pressure regulator and hose assembly supplied with the appliance must be used.
Lighting Instructions Do not lean over LP cooker while lighting. 1. Turn regulator control valve to OFF position. 2. Fully open LP tank valve. 3. Light match and place it over burner. Slowly turn ON the regulator control valve DO NOT stand with head or arms over cooker. 4. If ignition does not occur in 5 seconds, turn the burner control(s) off, wait 5 minutes, and repeat the lighting procedure. Curing of paints and parts will product an odor only on first use.
Cleaning the Burner CAUTION Checking and cleaning burner / venture tubes for insect nests. A clogged tube can lead to fire beneath the appliances. Spiders’ nests or wasps’ mud inside the burner may cause fire at the air damper. If a fire occurs, immediately turn off gas supply at LP tank valve. (See representative illustration in Fig.1) Note: Spiders and small insects can spin webs and build nests inside the burner. This especially occurs in late summer and fall before frost when spiders are most active.
Cleaning and Maintenance Keep appliance area clear and free from combustible materials, gasoline and other flammable vapors and liquids. Do not block holes in bottom or sides of appliance. Check burner flames regularly. Use appliance only in well-ventilated space. NEVER use in enclosed space such as carport, garage, porch, covered patio, or under ANY overhead construction. Completely thaw meat and poultry prior to placing in hot oil.
Part List Number Description 1 21” Tall Steel Stand x 1pc 2 Burner x 1pc 3 4 5 Regulator x 1pc 18QT Pot x 1pc Strainer basket x 2pcs 6 Strainer basket handle x 2pcs 7 5” Thermometer x 1pc Assembly Procedure Step 1. Insert the burner into the cooker stand and through the cut-out opening in the side of the stand. Step 2. Insert the threaded pin on the bottom of the burner into the center hole in the burner bracket. Make sure the alignment pin is seated in the notch on the edge of the burner bracket.
Step 3. Insert the brass hose fitting into the burner and tighten. Be sure not to strip threads on brass fitting. DO NOT OVERTIGHTEN. Proper connection is critical for correct operation of unit Step 4. Attach the handle by inserting bolts through basket, locking washers and nuts. Step 5. Thread wirer hook through hole on side of regulator. TF2014501-RG-00 Eng Page 15 20160930 V.
Step 6. When transporting or storing LP cooker without tank attached, hook regulator onto burner or cooker stand to prevent damage to regulator. TF2014501-RG-00 Eng Page 16 20160930 V.
DANGER An oil overflow may occur resulting in a fire which could cause property damage, personal injury or death. Follow directions above to prevent this. WARNING Avoid bumping of or impact with the appliance to prevent spillage or splashing of hot cooking liquid. Introduction of water or ice from any source into the oil/grease may cause overflow and serve burns from hot oil and water splatter.
6. 7. 8. 9. MANUFACTURER’S OBLIGATION: Manufacturer’s liability shall be limited to the delivery of a good, merchantable Product and, if necessary, the repair or replacement, at manufacturer’s option, of any defective part or unit. TRANSFER LIMITATIONS: This Limited Warranty is not assignable or transferable. It covers only the original purchaser.
