Installation Guide

ManualsBrandsRiverRidge Home ManualsBathEllsworth 23-5/8 in. W x 31-1/10 in. H Bathroom Linen Storage Floor Cabinet with Side Shelves in White

ASSEMBLY INSTRUCTIONS

RiverRidge

Ellsworth Floor Cabinet with Side Shelves

ITEM#: 06-025 White

ITEM#: 06-026 Espresso

ITEM#: 06-129 Taupe

ADULT ASSEMBLY REQUIRED

This product requires assembly by an adult because of small parts. Care should be taken

in unpacking and assembling this item to keep small parts away from children. During assembly

children should be kept away from the product due to possible risk of injury.

WARNING SEE FULL WARNING ON PAGE 2

Young children can be seriously injured or killed if furniture tips over. Don’t use

this item for a TV stand or place heavy objects on top of item. Always use

angle-braces or anchors to secure furniture to the wall.

Summary of content (13 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS RiverRidge® Ellsworth Floor Cabinet with Side Shelves ITEM#: 06-025 ITEM#: 06-026 ITEM#: 06-129 White Espresso Taupe ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. During assembly children should be kept away from the product due to possible risk of injury.
PAGE 2
THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF OR A TOTAL OF 75 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS. OVERLOADING WITH MORE THAN 25 POUNDS PER SHELF OR 75 POUNDS TOTAL WEIGHT MAY CAUSE DAMAGE TO THE SHELF AND MAY CAUSE SERIOUS INJURY OR DEATH.
PAGE 3
PARTS LIST NO QTY DESCRIPTION 1 1PC Top Board 2 1PC Bottom Board 3 2PCS Arch Shelf 4 1PC Rear Support Board 5 1PC Center Support Panel 6 1PC Right Side Panel 7 1PC Door 8 1PC Shelf 9 1PC Back Board 10 4PCS Leg
PAGE 4
NO PARTS QTY DESCRIPTION A 12PCS Cam Bolt B C 12PCS Cam Lock 16PCS Wood Dowel D 1PC Knob E 1PC Machine Screw (4x18mm) F 4PCS Shelf Holder G 2PCS Metal Pin H 1PC Magnet J 1PC Magnet Plate K M 1PC Screw (3x10mm) 2PCS Screw (3x14mm) N 16PCS Screw (4x20mm) P 2PCS Screw (4x30mm) Q 2PCS Plastic Anchor R 2PCS Adjustable Anchor Bracket S 2PCS Screw (4x10mm) TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED) THE USE OF A POWER SCREWDRIVER IS NOT RE
PAGE 5
STEP 1 1. Insert 3 wood dowels (C) into dowel holes on top board (1). 2. Screw 6 cam bolts (A) into cam bolt holes on top board (1). 3. Insert 2 screws (S) through holes on adjustable anchor bracket (R), then tighten to top board (1). STEP 2 1. 2. Insert 3 wood dowels (C) into dowel holes on bottom board (2). Screw 6 cam bolts (A) into cam bolt holes on bottom board (2).
PAGE 6
STEP 3 1. Insert 4 wood dowels (C) into dowel holes on arch shelf (3). 2. Repeat above step for another arch shelf (3). STEP 4 1. Insert 2 wood dowels (C) into dowel holes on edge of rear support board (4).
PAGE 7
STEP 5 1. 2. Attach magnet (H) to center support panel (5). Insert 2 screws (M) through holes on magnet (H) and tighten to center support panel (5). STEP 6 1. 2. 3. Insert 1 screw (K) through hole on magnet plate (J) and tighten to door (7). Attach knob (D) to door (7) by inserting 1 machine screw (E) through hole on door (7) and tighten to knob (D). Insert 2 pins (G) into holes on each end of door (7).
PAGE 8
STEP 7 1. 2. Overturn bottom board (2) and attach one leg (10) to bottom board (2) by inserting 4 screws (N) through holes on leg (10) and tighten to bottom board (2). Repeat above step to assemble other 3 legs. STEP 8 1. Attach arch shelves (3) to rear support board (4) by inserting wood dowels into dowel holes on rear support board (4).
PAGE 9
STEP 9 1. Attach center support panel (5) to rear support board (4) and arch shelves (3) by inserting wood dowels into holes on center support panel (5). STEP 10 1. Attach rear support board (4), center support panel (5) and right side panel (6) to bottom board (2) by inserting cam bolts into cam lock holes and inserting wood dowels into dowel holes on rear support board (4), center support panel (5) and right side panel (6). 2.
PAGE 10
STEP 11 1. Slide back board (9) into grooves on center support panel (5), right side panel (6) and bottom board (2). STEP 12 1. Attach door (7) to assembled unit by inserting pin (G) into hole on bottom board (2).
PAGE 11
STEP 13 1. Attach top board (1) to pre-assembled cabinet by inserting cam bolts into cam lock holes, wood dowels into dowel holes and pin into holes on rear support board (4), center support panel (5), right side panel (6) and door (7). 2. Insert 6 cam locks (B) into cam lock holes on rear support board (4), center support panel (5) and right side panel (6) and rotate clockwise to secure cam bolts. STEP 14 1.
PAGE 12
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. WARNING Please make sure your item is secured to the wall, per assembly instructions. CARE INSTRUCTIONS: Wipe clean with a water dampened cloth. Wipe dry with clean cloth. IMPORTANT: Keep assembly instructions for future reference.
PAGE 13
Enjoy your new RiverRidge® Cabinet! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States. If purchased outside of the United States, please contact retailer where purchased. RiverRidge® is a registered trademark of Sourcing Solutions, Inc.