Installation Guide

STEP 5
STEP 5
1.
Attach magnet (H) to center support panel (5).
2.
Insert 2 screws (M) through holes on magnet (H) and tighten to center support panel
(5).
STEP 6
STEP 6
1.
Insert 1 screw (K) through hole on magnet plate (J) and tighten to door (7).
2.
Attach knob (D) to door (7) by inserting 1 machine screw (E) through hole on door (7) and
tighten to knob (D).
3.
Insert 2 pins (G) into holes on each end of door (7).