Installation Guide

ManualsBrandsRiverRidge Home ManualsBathEllsworth 23-1/4 in. W x 68-31/100 x 11-1/2 in. D Corner Bathroom Linen Storage Tower Cabinet in White

ASSEMBLY INSTRUCTIONS

RiverRidge

Ellsworth Tall Corner Cabinet

ITEM#: 06-027 White

ITEM#: 06-028 Espresso

ITEM#: 06-127 Taupe

ADULT ASSEMBLY REQUIRED

This product requires assembly by an adult because of small parts. Care should be taken

in unpacking and assembling this item to keep small parts away from children. During assembly

children should be kept away from the product due to possible risk of injury.

WARNING SEE FULL WARNING ON PAGE 2

Young children can be seriously injured or killed if furniture tips over. Don’t use

this item for a TV stand or place heavy objects on top of item. Always use

angle-braces or anchors to secure furniture to the wall.

Summary of content (16 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS RiverRidge® Ellsworth Tall Corner Cabinet ITEM#: 06-027 ITEM#: 06-028 ITEM#: 06-127 White Espresso Taupe ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. During assembly children should be kept away from the product due to possible risk of injury.
PAGE 2
THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF OR A TOTAL OF 125 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS OR 125 POUNDS TOTAL WEIGHT. OVERLOADING MAY CAUSE DAMAGE TO THE SHELF AND MAY CAUSE SERIOUS INJURY OR DEATH.
PAGE 3
PARTS LIST NO QTY DESCRIPTION 1 2 3 1PC 1PC 1PC Middle Connection Board Left Lower Support Board Right Lower Support Board 4 5 6 7 8 1PC 1PC 1PC 1PC 2PCS Lower Cross Bar Right Side Door Left Side Door Adjustable Shelf Top & Bottom Fixed Shelf 9 10 1PC 1PC Left Lower Side Panel Right Lower Side Panel 11 12 1PC 1PC Right Upper Support Board Left Upper Support Board 13 14 15 16 1PC 1PC 1PC 2PCS Top Cross Board Left Upper Side Panel Right Upper Side Panel Top Open Shelf
PAGE 4
NO A PARTS LIST PARTS QTY DESCRIPTION 4PCS Cam Bolt B 4PCS Cam Lock C 24PCS Wood Dowel D 1PC Magnet E 2PCS Screw (3x14mm) F 18PCS Screw (3x10mm) G 4PCS Hinge H 2PCS Magnet Plate I 30PCS Screw (4x25mm) J 2PCS Knob K 2PCS Machine Screw (4x18mm) L 4PCS Shelf Holder M 4PCS Screw (4x35mm) N O 2PCS Long Wood Dowel 4PCS Plastic Anchor P 4PCS Screw (4x45mm) TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED) THE USE OF A POWER SCREWDRIVER IS NOT RECOM
PAGE 5
STEP 1 1. Insert 1 wood screw (F) through hole in magnet plate (H) and tighten to right side door (5). 2. Insert 4 wood screws (F) through holes in 2 hinges (G) and tighten to right side door (5). 3. Repeat above steps to assemble magnet plate (H) and 2 hinges (G) to left side door (6). STEP 2 1. Insert 4 wood dowels (C) into wood dowel holes on each end of lower cross bar (4). 2.
PAGE 6
STEP 3 1. Attach right side door (5) and left side door (6) to left lower support board (2) and right lower support board (3) by inserting 8 wood screws (F) through holes in hinges (G) on right side door (5) and left side door (6) and tighten to left lower support board (2) and right lower support board (3). STEP 4 1.
PAGE 7
STEP 5 1. Attach left lower side panel (9) to left lower support board (2) and shelf (8) by inserting wooden dowel (C) into dowel hole in left lower side panel (9). 2. Insert 4 wood screws (I) through holes in left lower side panel (9) and tighten to shelf (8) and left lower support board (2). STEP 6 1.
PAGE 8
STEP 7 1. Screw 4 cam bolts (A) into cam bolt holes on middle connection board (1). Do not overtighten. 2. Attach magnet (D) to middle connection board (1) by inserting 2 screws (E) through holes on magnet (D) and tighten to middle connection board (1). STEP 8 1. Insert 4 wood dowels (C) into wood dowel holes in end of top cross board (13). 2.
PAGE 9
STEP 9 1. Attach shelf (8) to both upper support boards (11) and (12) by inserting 2 screws (I) through holes on shelf (8) and tighten to left upper support board (12) and right upper support board (11). Do not overtighten. 2. Insert 2 wood dowels (C) into dowel holes on shelf (8). STEP 10 1. Insert 2 wood dowels (C) into wood dowel holes on each shelf (16). 2.
PAGE 10
STEP 11 1. Attach left upper side panel (14) to shelves (16) and left upper support board (12) and shelf (8) by inserting wood dowels (C) into wood dowel holes on inner side of left upper side panel (14). 2. Insert 4 wood screws (I) through holes on left upper side panel (14) and tighten to shelf (8) and left upper support board (12). STEP 12 1. Insert 2 wood dowels (C) into wood dowel holes on shelves (16).
PAGE 11
STEP 13 1. Attach right upper side panel (15) to left upper side panel (14), shelves (16) and shelf (8) by inserting wood dowels (C) on shelves (16) and shelf (8) into wood dowel holes on inner side of right upper side panel (15). 2. Insert 9 wood screws (I) through holes on right upper side panel (15) and tighten to shelf (8), shelves (16), right upper support board (11) and left upper side panel (14). STEP 14 1.
PAGE 12
STEP 15 1. Insert 2 long wood dowels (N) and 4 wood dowels (C) into wood dowel holes on lower support boards (2) and (3) and lower side panels (9) and (10). 2. Two people may be required for this step. Attach upper unit to lower unit by inserting wooden dowels (C) and (N) into wood dowel holes on upper support boards (11) and (12) and upper side panels (14) and (15) and inserting 4 cam bolts (A) into cam lock holes on lower side panels (14) and (15).
PAGE 13
STEP 16 1. Insert 4 cam locks (B) into cam lock holes on left lower side panel (9) and right lower side panel (10) and rotate cam locks (B) clockwise to lock cam bolts. 2. Insert 4 adjustable shelf holders (L) into holes on left lower side panel (9) and right lower side panel (10). 3. Insert 1 machine screw (K) through hole on left side door (6) and tighten to knob (J). 4. Repeat above step 3 to assemble knob to right door (5).
PAGE 14
STEP 17 1. Place shelf (7) onto shelf holders (L). Option #1: Securing to Drywall 1. Place cabinet against wall in desired location. Using a pencil, make 4 small marks on wall through holes on side panels. Move cabinet away from wall and screw 4 plastic anchors (O) into wall on pencil marks. 2. Place cabinet against wall, insert 4 screws (P) through holes on side panels, then tighten to plastic anchors (O). Option #2: Securing to Drywall and Wood Stud 1. Place cabinet against wall in desired location.
PAGE 15
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. WARNING Please make sure your item is secured to the wall, per assembly instructions. CARE INSTRUCTIONS: Wipe clean with a water dampened cloth. Wipe dry with clean cloth. IMPORTANT: Keep assembly instructions for future reference.
PAGE 16
Enjoy your new RiverRidge® Cabinet! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States. If purchased outside of the United States, please contact retailer where purchased. RiverRidge® is a registered trademark of Sourcing Solutions, Inc.