Installation Guide

STEP 1

1. Insert 1 Wood screw(F) through hole in the Magnet plate(H) then tighten to Right side door(5) by using a Philips
screwdriver.
2. Insert 4 Wood screws(F) through holes in 2 hinges(G) then tighten to the Right side door(5) by using a Philips
screwdriver.
3. Repeat the above steps to assemble the Magnet plate(H) and 2 Hinges(G) to Left side door(6).
STEP 2
1. Place lower cross bars (2) and (3) as pictured above with backside of each part facing towards you.
2. Insert 4 wood dowels(C) into the dowel holes on each end of the Lower cross bar(4)
3. Attach the Left lower support board(2) to the Lower cross bar(4) by inserting wood dowels into dowel holes on
the left lower support board(2).
4. Attach the Right lower support board(3) to the Lower cross bar(4) by inserting wood dowels into dowel holes on
the Right lower support board(3).