ASSEMBLY INSTRUCTIONS RiverRidge® Ellsworth Single Door Floor Cabinet ITEM #: 06-029 White ITEM #: 06-030 Espresso ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. During assembly children should be kept away from the product due to possible risk of injury. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over.
THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF OR A TOTAL OF 75 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS OR 75 POUNDS TOTAL WEIGHT. OVERLOADING MAY CAUSE DAMAGE TO THE SHELF AND MAY CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST NO QTY DESCRIPTION 1 1PC Top Board 2 1PC Left Side Panel 3 1PC Right Side Panel 4 1PC Cross Bar 5 1PC Door 6 1PC Middle Panel 7 1PC Bottom Board 8 1PC Shelf 9 1PC Back Board
PARTS LIST NO PARTS QTY DESCRIPTION A 12PCS Cam Bolt B 12PCS Cam Lock C 17PCS Wood Dowel D 1PC Knob E 1PC Machine Screw (4x18mm) F 4PCS Shelf Holder G 2PCS Metal Pin H 1PC Magnet J 1PC Magnet Plate K 1PC Screw (3x10mm) M 2PCS Screw (3x14mm) N 1PC Screw (4x30mm) P 1PC Plastic Anchor Q 1PC Adjustable Anchor Bracket R 1PC Screw (4x10mm) TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED) THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASS
STEP 1 1. 2. Screw 4 cam bolts (A) into cam bolt holes on top board (1). Insert 5 wood dowels (C) into dowel holes on top board (1). STEP 2 1. 2. 3. Screw 4 cam bolts (A) into cam bolt holes on left side panel (2). Insert 6 wood dowels (C) into dowel holes on left side panel (2). Attach magnet (H) to left side panel (2) by inserting 2 screws (M) through holes on magnet (H) and tighten to left side panel (2).
STEP 3 1. 2. Screw 4 cam bolts (A) into cam bolt holes on right side panel (3). Insert 6 wood dowels (C) into dowel holes on right side panel (3). STEP 4 1. 2. 3. Insert 1 screw (K) through hole on magnet plate (J) and tighten to door (5). Attach knob (D) to door (5) by inserting 1 screw (E) through hole on door (5) and tighten to knob (D). Insert 2 door pins (G) into holes on each end of door (5).
STEP 5 1. 2. Attach cross bar (4), middle panel (6) and bottom board (7) to left side panel (2) by inserting cam bolts into cam lock holes and inserting wood dowels into dowel holes on cross bar (4), middle panel (6) and bottom board (7). Insert 4 cam locks (B) into cam lock holes on middle panel (6) and bottom board (7) and rotate clockwise to secure cam bolts. STEP 6 1. Slide back board (9) into grooves on left side panel (2), middle panel (6) and bottom board (7).
STEP 7 1. Attach door (5) to middle panel (6) and bottom board (7) by inserting door pins (G) into holes on middle panel (6) and bottom board (7). STEP 8 1. 2. Attach right side panel (3) to cross bar (4), middle panel (6) and bottom board (7) by inserting cam bolts into cam lock holes and inserting wood dowels into dowel holes on cross bar (4), middle panel (6) and bottom board (7).
STEP 9 1. 2. Attach top board (1) to both side panels (2), (3) and cross bar (4) by inserting cam bolts into cam lock holes and inserting wood dowels into dowel holes on both side panels (2), (3) and cross bar (4). Insert 4 cam locks (B) into cam lock holes on both side panels (2), (3) and rotate clockwise to secure cam bolts. STEP 10 1. Insert 1 screw (R) through hole on adjustable anchor bracket (Q), then tighten to middle panel (6).
STEP 11 1. Insert 4 shelf holders (F) into desired positions and put shelf (8) onto shelf holders (F). Option #1: Securing to Drywall 1. Position cabinet against wall in desired location. Using a pencil, make small mark on wall through hole on bracket (Q). Move cabinet away from wall and screw 1 plastic anchor (P) into wall on pencil mark. 2. Place cabinet against wall, insert 1 screw (N) through hole on bracket (Q), then tighten to plastic anchor (P). Option #2: Securing to Drywall and Wood Stud 1.
Enjoy your new RiverRidge® Cabinet! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States. If purchased outside of the United States, please contact retailer where purchased. RiverRidge® is a registered trademark of Sourcing Solutions, Inc.
