ASSEMBLY INSTRUCTIONS RiverRidge® ROLLING SIDE CABINET ITEM#:06-033 White ITEM#:06-034 Espresso ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of the small parts. Care should be taken in unpacking and assembling this item to keep the small parts away from children. WARNING Young children can be seriously injured or killed, if furniture tips over. Don’t use this item for a TV stand. Use angle-braces or anchors to secure furniture to the wall.
Send requests for missing or damaged parts replacements by email to : customer.service@ssi-rr.com or call toll free 1-(844)-223-5201 or order parts on line at www.riverridgehome.com THIS SHELF UNIT WILL HOLD UP TO 12 POUNDS PER SHELF OR A TOTAL OF 36 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 12 POUNDS. IF LOADED WITH MORE THAN 12 POUNDS PER SHELF AS THIS MAY CAUSE DAMAGE TO THE SHELF AND MAY CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST 1 1PC TOP BOARD 2 1PC RIGHT SIDE PANEL 3 1PC LEFT SIDE PANEL 4 2PCS MIDDLE CROSS BAR 5 1PC BOTTOM BOARD 6 1PC SHELF 7 2PCS BOTTOM CROSS BAR A 16PCS CAM BOLT B 16PCS CAM LOCK C 16PCS WOOD DOWEL D 1PC METAL HANDLE E 2PCS SCREW 4x20mm F 2PCS REAR WHEEL WITH STOPPER G 2PCS FRONT WHEEL H 16PCS SCREW 4x12mm TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILIPS SCREWDRIVER (NOT INCLUDED) THE USE OF POWER SCREWDRIVER IS NOT RECOMMENDED
STEP1 STEP-1: 1. Screw 4 Cam Bolts (A) into the pre-threaded holes on the Top Board (1). STEP2 STEP-2: 1. Attach 2 Front Wheels (G) to Bottom Board (5) by inserting 8 Screws (H) through the holes on the Front Wheels (G) then tighten to Bottom Board (5). 2. Attach 2 Rear Wheels with Stoppers (F) to Bottom Board (5) by inserting 8 Screws (H) through the holes on the Rear Wheels with Stoppers (F) then tighten to Bottom Board (5).
STEP3 STEP-3: 1. Screw 4 Cam Bolts (A) into the pre-threaded holes on the Right Side Panel (2). 2. Insert 8 Wood Dowels (C) into the dowel holes on the Right Side Panel (2). STEP4 STEP-4: 1. Screw 4 Cam Bolts (A) into the pre-threaded holes on the Left Side Panel (3). 2. Insert 8 Wood Dowels (C) into the dowel holes on the Left Side Panel (3).
STEP 5 A C C A C A C C C A C C STEP-5: 1. Attach 1 Bottom Cross Bar (7) to Left Side Panel (3) by inserting the Cam Bolt (A) into the cam bolt holes and inserting Wood Dowels (C) into the dowel holes on the Bottom Cross Bar (7). 2. Insert 1 Cam Lock (B) into the cam lock holes on the Bottom Cross Bar (7), then rotate clockwise to secure the Cam Bolts in place. 3. Repeat above steps to assemble the second Bottom Cross Bar (7) and 2 Middle Cross Bars (4) to Left Side Panel (3).
STEP 7 STEP-7: 1. Attach Right Side Panel (2) to pre-assembled unit by inserting the cam bolts into cam lock holes and inserting the wood dowels into the dowel holes on the Middle Cross Bar (4) and Bottom Cross Bar (7). 2. Insert 4 Cam Locks (B) into the cam lock holes on the Middle Cross Bar (4) and Bottom Cross Bar (7), then rotate clockwise to secure the Cam Bolts in place. STEP 8 STEP-8: 1.Screw 4 Cam Bolts (A) into the pre-threaded holes on the bottom board (5).
STEP 9 STEP-9: 1. Attach pre-assembled unit to Bottom Board (5) by inserting 4 Cam Bolts (A) into the cam lock holes on the Left Side Panel (2) and Right Side Panel (3), then rotate clockwise to secure the Cam Bolts in place. 2. Attach the Metal Handle (D) to Right Side Panel (2) by inserting 2 screws (E) through the holes on the Right Side Panel (2), then tighten to Metal Handle (D). STEP 10 STEP-10 1.
ENJOY YOUR NEW RiverRidge® ROLLING SIDE CABINET NOW ! Attention Adults: The cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct the hazard such as tightening of screws and taking any damaged parts away from children. Thank you for purchasing this RiverRidge® Home Products item. We hope you enjoy it, and consider purchasing other RiverRidge® items. Send requests for missing or damaged parts replacements by email to : customer.service@ssi-rr.
