Installation Guide

STEP 9
STEP-9:
1. Attach pre-assembled unit to Bottom Board (5) by inserting 4 Cam Bolts (A) into the cam lock
holes on the Left Side Panel (2) and Right Side Panel (3), then rotate clockwise to secure the Cam
Bolts in place.
2. Attach the Metal Handle (D) to Right Side Panel (2) by inserting 2 screws (E) through the holes on
the Right Side Panel (2), then tighten to Metal Handle (D).
STEP 10
STEP-10
1. Attach the Top Board (1) to pre-assembled unit by inserting 4 Cam Bolts into cam lock holes on
the Left Side Panel (2) and Right Side Panel (3), then inserting Cam Lock (B) into the cam lock
holes, then rotate clockwise to secure the Cam Bolt in place.