ASSEMBLY INSTRUCTIONS RiverRidge® Somerset Single Door Floor Cabinet ITEM #: 06-037 White ITEM #: 06-076 Gray ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. During assembly children should be kept away from the product due to possible risk of injury. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over.
THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF OR A TOTAL OF 75 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS OR 75 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 25 POUNDS PER SHELF OR 75 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM WALL AND CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST NO QTY DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC Right Side Panel Left Side Panel Cross Bar Bottom Board Top Board Back Board Door Drawer Front Board Drawer Left Side Panel Drawer Right Side Panel Drawer Back Board Drawer Bottom Board Shelf Left Support Board Right Support Board
NO A PARTS QTY DESCRIPTION 18PCS Wood Dowel B 18PCS Cam Bolt C 18PCS Cam Lock D E 10PCS Screw (3x12mm) 2PCS Hinge F 1PC Magnet Plate G 13PCS Screw (2.5x12mm) H 1 SET Magnet with 2 Screws I J 4PCS Shelf Holder 4PCS Machine Screw (4x12mm) K 2PCS Handle L 4PCS Screw (4x35mm) N 1PC Plastic Anchor O 1PC Screw (4x30mm) P 1PC Adjustable Anchor Bracket R 1PC Screw (4x14mm) S 8PCS Screw (3.
STEP 1 1. 2. 3. Attach drawer left side panel (9) to drawer back board (11) by inserting 2 screws (L) through holes on drawer left side panel (9), then tighten into drawer back board (11). Attach drawer right side panel (10) to drawer back board (11) by inserting 2 screws (L) through holes on drawer right side panel (10), then tighten into drawer back board (11). Slide drawer bottom board (12) into grooves on drawer left side panel (9) and right side panel (10) and drawer back board (11). STEP 2 1.
STEP 3 1. 2. Attach drawer slides (U) to drawer right side panel (10) by inserting 2 wood screws (S) through holes on drawer slides (U), then tighten into drawer right side panel (10). Attach drawer slides (U) to drawer left side panel (9) by inserting 2 screws (S) through holes on drawer slides (U), then tighten into drawer left side panel (9). STEP 4 1. 2. 3. 4. 5. Insert 2 wood dowels (A) into dowel holes on left support board (14).
STEP 5 1. 2. 3. 4. 5. 6. Attach left support board (14) to left side panel (2) by inserting cam bolts into cam lock holes and inserting wood dowels into dowel holes on the left side panel (2). Insert 3 cam locks (C) into cam lock holes on left side panel (2), then rotate clockwise to secure cam bolts in place. Attach drawer slides (T) to left side panel (2) by inserting 2 screws (S) through holes on drawer slides (T), then tighten to left side panel (2).
STEP 6 1. Screw 6 cam bolts (B) into cam bolt holes on left side panel (2) and right side panel (1). 2. Insert 6 wood dowels (A) into dowel holes on left side panel (2) and right side panel (1). 3. Attach cross bar (3) to left side panel (2) by inserting wood dowel (A) and cam bolt (B) into holes on cross bar (3) and insert 1 cam lock (C) into cam lock hole on cross bar (3) and rotate clockwise to secure cam bolt (B) in place. 4.
STEP 7 1. 2. 3. 4. 5. 6. Insert 1 screw (R) through adjustable anchor bracket (P) into hole on top board (5). Screw 4 cam bolts (B) into cam bolt holes on top board (5). Insert 4 wood dowels (A) into dowel holes on top of left side panel (2) and right side panel (1). Attach top board (5) to left side panel (2) and right side panel (1) by inserting 4 wood dowels (A) into dowel holes on top board (5), then insert 4 cam bolts (B) into holes on left side panel (2) and right side panel (1).
STEP 9 Option #1: Securing to Drywall 1. Position cabinet against wall in desired location. Using a pencil, make small mark on wall through hole on bracket (P). Move cabinet away from wall and screw 1 plastic anchor (N) into wall on pencil mark. 2. Place cabinet against wall, insert 1 screw (O) through hole on metal bracket (P), then tighten to plastic anchor (N). Option #2: Securing to Drywall and Wood Stud 1. Position cabinet against wall in desired location.
STEP 11 1. 2. Insert 4 shelf holders (I) into holes on left side panel (2) and right side panel (1) at desired shelf height. Place shelf (13) onto shelf holders (I). ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. WARNING Please make sure your item is secured to the wall, per assembly instructions.
Enjoy your new RiverRidge® Cabinet! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States. If purchased outside of the United States, please contact retailer where purchased. RiverRidge® is a registered trademark of Sourcing Solutions, Inc.
