Installation Guide

ManualsBrandsRiverRidge Home ManualsBathSomerset 16 in. W x 30 in. H x 12 in. D Bathroom Linen Storage Floor Cabinet in Gray

ASSEMBLY INSTRUCTIONS

RiverRidge

Somerset 1 Door Floor Cabinet

ITEM #: 06-037 WHITE

ITEM #: 06-076 GRAY

ADULT ASSEMBLY REQUIRED

This product requires assembly by an adult because of small parts. Care should be taken in

unpacking and assembling this item to keep small parts away from children.

WARNING SEE FULL WARNING ON PAGE 2

Young children can be seriously injured or killed if furniture tips over. Don’t use

this item for a TV stand or place heavy objects on top of item. Always use

angle-braces or anchors to secure furniture to the wall.

Summary of content (27 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS RiverRidge® Somerset 1 Door Floor Cabinet ITEM #: 06-037 WHITE ITEM #: 06-076 GRAY ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over. Don’t use this item for a TV stand or place heavy objects on top of item.
PAGE 2
THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF OR A TOTAL OF 75 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS OR 75 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 25 POUNDS PER SHELF OR 75 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM WALL AND CAUSE SERIOUS INJURY OR DEATH.
PAGE 3
PARTS LIST QTY DESCRIPTION 1 1 PC RIGHT SIDE PANEL 2 1 PC LEFT SIDE PANEL 3 1 PC CROSS BAR 4 1 PC BOTTOM BOARD 5 1 PC TOP BOARD 6 1 PC BACK BOARD 7 1 PC DOOR 8 1 PC DRAWER FRONT BOARD 9 1 PC DRAWER LEFT SIDE PANEL 10 1 PC DRAWER RIGHT SIDE PANEL 11 1 PC DRAWER BACK BOARD 12 1 PC DRAWER BOTTOM BOARD 13 1 PC SHELF 14 1 PC LEFT SUPPORT BOARD 15 1 PC RIGHT SUPPORT BOARD NO.
PAGE 4
NO PARTS QTY DESCRIPTION A 18 PCS WOOD DOWEL B 18 PCS CAM BOLT C 18 PCS CAM LOCK D 13 PCS WOOD SCREW 3X10MM E 2 PCS HINGE F 1 PC MAGNET PLATE G 14 PCS WOOD SCREW 3X12MM H 1 SET MAGNET WITH 2 SCREWS I 4 PCS SHELF HOLDER J 4 PCS MACHINE SCREW 4X15MM K 2 PCS HANDLE L 5 PCS LONG WOOD SCREW 3.8X35MM N 1 PC PLASTIC ANCHOR P 2 PCS METAL BRACKET Q 1 PC PLASTIC LOCK STRIP R 1 PC WOOD SCREW 4X16MM S 10 PCS WOOD SCREW 3.
PAGE 5
STEP 1 L 11 L 10 9 12 1. Attach drawer left side panel (9) to drawer back board (11) by inserting 2 long wood screws (L) through holes on drawer left side panel (9) and tighten into drawer back board (11). 2. Attach drawer right side panel (10) to drawer back board (11) by inserting 2 long wood screws (L) through holes on drawer right side panel (10) and tighten into drawer back board (11). 3.
PAGE 6
STEP 3 11 9 10 12 C J K 8 1.Attach drawer front board (8) to drawer left side panel (9), drawer right side panel (10) and drawer bottom board (12) by inserting cam bolts (B) and wood dowels (A) into holes on drawer left side panel (9) and drawer right side panel (10) and inserting edge of drawer bottom board (12) into groove on drawer front board (8). 2.Insert 2 cam locks (C) into cam lock holes on drawer left side panel (9) and drawer right side panel (10) and rotate clockwise to secure cam bolts (B).
PAGE 7
STEP 5 1.Insert 2 wood dowels (A) into dowel holes on left support board (14). 2.Screw 3 cam bolts (B) into pre-threaded holes on left support board (14. 3.Insert 2 wood dowels (A) into dowel holes on right support board (15). 4.Screw 3 cam bolts (B) into pre-threaded holes on right support board (15). 5.Attach 2 hinges (E) to the left support board (14). 6.Insert 6 wood screws (D) through holes on hinges (E) and tighten to left support board (14). STEP 6 1.
PAGE 8
STEP 7 1. Attach left support board (14) to left side panel (2) by inserting cam bolts into cam lock holes and inserting wood dowels into dowel holes on the left side panel (2). 2. Insert 3 cam locks (C) into cam lock holes on left side panel (2) and rotate clockwise to secure cam bolts in place. 3. Repeat above steps to assemble right side panel (1) and right support board (15). STEP 8 1.
PAGE 9
STEP 9 3 1 H C 4 2 C 1.Attach cross bar (3) to left side panel (2) by inserting wood dowel (A) and cam bolt (B) into holes on cross bar (3) and insert 1 cam lock (C) into cam lock hole on cross bar (3) and rotate clockwise to secure cam bolt (B) in place. 2.Attach bottom board (4) to left side panel (2) by inserting wood dowels (A) and cam bolts (B) into holes on bottom board (4) and insert 2 cam locks (C) into cam lock holes on bottom board (4) and rotate clockwise to secure cam bolts (B) in place.
PAGE 10
STEP 11 5 A A C 1 2 1.Insert 4 wood dowels (A) into dowel holes on top of left side panel (2) and right side panel (1). 2.Attach top board (5) to left side panel (2) and right side panel (1) by inserting 4 wood dowels (A) into dowel holes on top board (5) and inserting 4 cam bolts (B) into holes on left side panel (2) and right side panel (1). 3.Insert 2 cam locks (C) into cam lock holes on left side panel (2) and rotate clockwise to secure cam bolts (B) in place. 4.
PAGE 11
STEP 13 D 7 D 1.Attach door (7) to left side panel (2) by inserting 6 wood screws (D) through holes on metal hinges (E) and tighten to door (7). STEP 14 I 13 1.Insert 4 shelf holders (I) into holes on left side panel (2) and right side panel (1) making sure 4 shelf holders (I) are at same height. 3.Put shelf (13) onto shelf holders (I).
PAGE 12
STEP 15 1.Attach drawer to cabinet by inserting drawer slides with wheels into drawer slides in cabinet. 2.Adjust hinges to make door close tight as needed.
PAGE 13
STEP 16 N P P R L 1.Attach metal bracket (P) to top board (5) by inserting 1 wood screw (R) through hole on metal bracket (P) and tighten to top board (5). 2.Align position of metal bracket (P) assembled to cabinet to desired position on wall and a drill hole on wall. 4.Insert 1 plastic anchor (N) into hole on wall and attach another metal bracket (P) to anchor (N). 5.Insert 1 long screw (L) through metal bracket (P) and tighten to plastic anchor (N). STEP 17 Q 1.
PAGE 14
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. WARNING Please make sure your item is secured to the wall, per assembly instructions.
PAGE 15
Enjoy your new RiverRidge® Cabinet! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com RiverRidge® is a registered trademark of Sourcing Solutions, Inc.
PAGE 16
INSTRUCCIONES PARA EL ARMADO ARMARIO DE PISO CON 1 PUERTA SOMERSET de RiverRidge® ARTÍCULO N.°: 06-037 ARTÍCULO N.°: 06-076 BLANCO GRIS REQUIERE QUE LO ARME UN ADULTO. Este producto requiere que lo arme un adulto debido a las piezas pequeñas. Se debe tener cuidado al desempaquetar y armar este artículo para que las piezas pequeñas estén lejos de los niños. ADVERTENCIA Los niños pequeños pueden sufrir lesiones serias o incluso la muerte, si el mueble se tumba.
PAGE 17
ESTA UNIDAD CON ESTANTE ACEPTARÁ HASTA 25 LIBRAS POR ESTANTE O SEA UN TOTAL DE 75 LIBRAS. NO PONGA MÁS DE 25 LIBRAS EN CADA ESTANTE. SI ESTÁ CARGADO CON MÁS DE 25 LIBRAS POR ESTANTE, ESTO PODRÍA CAUSAR DAÑOS AL ESTANTE Y UNA SERIA LESIÓN O LA MUERTE. ADVERTENCIA SERIAS LESIONES O FATALES PUEDEN OCURRIR SI SE TUMBA EL MUEBLE.
PAGE 18
PAGE 19
PAGE 20
PASO 1 1. Sujete el panel del lado izquierdo del cajón (9) a la tabla de atrás del cajón (11) insertando 2 tornillos largos para madera (L) a través de los agujeros del panel del lado izquierdo del cajón (9), luego apretándolos a la tabla de atrás del cajón (11) usando un destornillador Phillips. 2.
PAGE 21
PASO 3 1. Sujete los deslizadores para el cajón al cajón (U) al panel del lado derecho del cajón (10) insertando 2 tornillos para madera (S) en los agujeros de los deslizadores del cajón para el cajón (U), luego apriételos al panel del lado derecho del cajón (10) usando un destornillador Phillips. 2.
PAGE 22
PASO 5 1. Sujete la tabla de soporte izquierda (14) al panel del lado izquierdo (2) insertando los pernos de leva en los agujeros de la traba de leva y las clavijas de madera en los agujeros de las clavijas en el panel del lado izquierdo (2). 2. Inserte 3 trabas de leva (C) en los agujeros de la traba de leva en el panel del lado izquierdo (2) por separado y luego gírelas en el sentido de las manecillas del reloj para sujetar los pernos de leva en su lugar usando un destornillador Phillips. 3.
PAGE 23
PASO 6 1. Atornille 6 pernos de leva (B) en los agujeros con rosca en el panel del lado izquierdo (2) y panel del lado derecho (1) por separado usando un destornillador Phillips. 2. Inserte 6 clavijas de madera (A) en los agujeros de las clavijas del panel del lado izquierdo (2) y panel del lado derecho (1) por separado. 3.
PAGE 24
PASO 7 1. Inserte 4 clavijas de madera (A) en los agujeros de las clavijas del panel del lado izquierdo (2) y panel del lado derecho (1) por separado. 2. Atornille 4 pernos (B) en los agujeros con rosca de la tabla de arriba (5). 3.
PAGE 25
PASO 9 1. Sujete el cajón al armario insertando los 2 deslizadores del cajón con ruedas en los dos deslizadores del cajón que ya están armados en el armario. 2. Sujete la puerta (7) al panel del lado izquierdo (2) insertando 4 tornillos para madera (D) en los agujeros de las bisagras de metal (E) luego apriételos a la puerta (7). PASO 10 1. Inserte 4 soportes del estante (I) en los agujeros del panel del lado izquierdo (2) y panel del lado derecho (1). 2.
PAGE 26
PASO 11 1. Según la posición del soporte de metal (P) que está armado en el armario, perfore un agujero en la pared. 2. Inserte 1 sujetador de plástico (N) en el agujero de la pared y luego sujete otro soporte de metal (P) al sujetador. 3. Inserte 1 tornillo largo (O) por el soporte de metal (P) y luego apriételo al sujetador de plástico (N). PASO 12 PARED 1. Ponga el armario contra la pared. 2.
PAGE 27
¡DISFRUTE SU NUEVO ARMARIO de RiverRidge®AHORA! Esperamos que lo disfrute y que considere comprar otros productos RiverRidge®. Envíe pedidos de piezas dañadas o que faltan por correo electrónico a: customer.service@ssi-rr.com o llame gratis al 1-(844)-223-5201 o pida piezas en línea en www.riverridgehome.com RiverRidge® es una marca registrada de Sourcing Solutions, Inc., Hudson, WI 54016.