Installation Guide

ManualsBrandsRiverRidge Home ManualsBathSomerset Collection 22-1/2 in. W x 24-1/2 in. H x 7-7/8 in. D Bathroom Storage Wall Cabinet in Gray

ASSEMBLY INSTRUCTIONS

RiverRidge

Somerset 2-Door Wall Cabinet

ITEM #: 06-039 White

ITEM #: 06-078 Gray

ADULT ASSEMBLY REQUIRED

This product requires assembly by an adult because of small parts. Care should be taken

in unpacking and assembling this item to keep small parts away from children. During assembly

children should be kept away from the product due to possible risk of injury.

WARNING SEE FULL WARNING ON PAGE 2

Young children can be seriously injured or killed if furniture tips over. Don’t use

this item for a TV stand or place heavy objects on top of item. Always use

angle-braces or anchors to secure furniture to the wall.

Summary of content (11 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS RiverRidge® Somerset 2-Door Wall Cabinet ITEM #: 06-039 White ITEM #: 06-078 Gray ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. During assembly children should be kept away from the product due to possible risk of injury. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over.
PAGE 2
THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF OR A TOTAL OF 75 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS OR 75 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 25 POUNDS PER SHELF OR 75 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM WALL AND CAUSE SERIOUS INJURY OR DEATH.
PAGE 3
PARTS LIST NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 QTY 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC DESCRIPTION Left Door Right Door Right Side Panel Left Side Panel Cross Bar Shelf Top Board Bottom Board Upper Back Board Middle Back Board Lower Back Board Adjustable Shelf Right Support Board Left Support Board
PAGE 4
NO PARTS QTY DESCRIPTION A 16PCS Wood Dowel B 12PCS Cam Bolt C 12PCS Cam Lock D 18PCS Screw (3x12mm) E 4PCS Hinge F 2PCS Magnet Plate G 24PCS Screw (2.
PAGE 5
STEP 1 1. 2. 3. Attach 1 magnet plate (F) to left door (1) by inserting 1 screw (D) through hole on magnet plate (F), then tighten to left door (1). Attach 1 handle (K) to left door (1) by inserting 2 machine screws (J) through holes on left door (1), then tighten to handle (K). Repeat above steps to assemble another magnet plate (F) and handle (K) to right door (2). STEP 2 1. 2. 3. Screw 3 cam bolts (B) into cam bolt holes on right support board (13).
PAGE 6
STEP 3 1. 2. 3. Attach left support board (14) to left side panel (4) by inserting 3 cam bolts (B) into cam lock holes on left side panel (4). Insert 3 cam locks (C) into cam lock holes on left side panel (4), then rotate clockwise to secure cam bolts (B) in place. Repeat above steps to assemble right side panel (3) and right support board (13). STEP 4 1. 2. 3. 4. 5. 6. Screw 2 cam bolts (B) into cam bolt holes on left side panel (4) and right side panel (3).
PAGE 7
STEP 5 1. 2. 3. 4. 5. 6. 7. 8. 9. Screw 2 cam bolts (B) into the cam bolt holes on bottom board (8). Insert 4 wood dowels (A) into dowel holes on bottom board (8). Attach bottom board (8) to left side panel (4) and right side panel (3) by inserting cam bolts (B) and wood dowels (A) into holes on left side panel (4) and right side panel (3). Insert 2 cam locks (C) into cam lock holes on left side panel (4) and right side panel (3), then rotate clockwise to secure cam bolts (B) in place.
PAGE 8
STEP 6 1. 2. 3. Attach upper back board (9) and middle back board (10) together by sliding into plastic connection strip (N). Attach upper back board (9) and middle back board (10) to cabinet by inserting screws (G) through holes on upper back board (9) and middle back board (10), then tighten into cabinet. Attach lower back board (11) to cabinet by inserting screws (G) through holes on lower back board (11), then tighten into cabinet. STEP 7 1. 2.
PAGE 9
STEP 8 Option #1: Securing to Drywall 1. Using wall mounting paper template to determine position, screw 2 plastic anchors (L) into drywall. 2. Insert 2 screws (M) through holes on inside of cabinet and into plastic anchors (L) and tighten. Option #2: Securing to Drywall and Wood Stud 1. Insert 2 screws (M) through holes on inside of cabinet, then tighten through drywall and into wood stud. STEP 9 1. 2.
PAGE 10
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. WARNING Please make sure your item is secured to the wall, per assembly instructions. CARE INSTRUCTIONS: Wipe clean with a water dampened cloth. Wipe dry with clean cloth. IMPORTANT: Keep assembly instructions for future reference.
PAGE 11
Enjoy your new RiverRidge® Cabinet! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States. If purchased outside of the United States, please contact retailer where purchased. RiverRidge® is a registered trademark of Sourcing Solutions, Inc.