Installation Guide

STEP 1
1. Attach 1 magnet plate (F) to left door (1) by inserting 1 screw (D) through hole on magnet
plate (F), then tighten to left door (1).
2. Attach 1 handle (K) to left door (1) by inserting 2 machine screws (J) through holes on left
door (1), then tighten to handle (K).
3. Repeat above steps to assemble another magnet plate (F) and handle (K) to right door (2).
STEP 2
1. Screw 3 cam bolts (B) into cam bolt holes on right support board (13).
2. Attach 2 metal hinges (E) to right support board (13) by inserting 4 screws (D) through
holes on metal hinges (E), then tighten to right support board (13).
3. Repeat above steps for left support board (14).