Installation Guide
STEP 3
1. Attach left support board (14) to left side panel (4) by inserting 3 cam bolts (B) into cam
lock holes on left side panel (4).
2. Insert 3 cam locks (C) into cam lock holes on left side panel (4), then rotate clockwise to
secure cam bolts (B) in place.
3. Repeat above steps to assemble right side panel (3) and right support board (13).
STEP 4
1. Screw 2 cam bolts (B) into cam bolt holes on left side panel (4) and right side panel (3).
2. Insert 8 wood dowels (A) into dowel holes on left side panel (4) and right side panel (3).
3. Attach cross bar (5) to left side panel (4) by inserting wood dowels (A) into dowel holes on
cross bar (5).
4. Attach shelf (6) to left side panel (4) by inserting 1 cam bolt (B) and 2 wood dowels (A) into
holes on shelf (6), then insert 1 cam lock (C) into cam lock hole on shelf (6) and rotate
clockwise to secure cam bolt (B) in place.
5. Attach right side panel (3) to cross bar (5) and shelf (6) by inserting wood dowels (A) into
holes on cross bar (5), and inserting cam bolt (B) and wood dowels (A) into holes on shelf (6).
6. Insert 1 cam lock (C) into cam lock hole on shelf (6) and rotate clockwise to secure cam
bolt (B) in place.