Installation Guide

STEP 5
1. Screw 2 cam bolts (B) into the cam bolt holes on bottom board (8).
2. Insert 4 wood dowels (A) into dowel holes on bottom board (8).
3. Attach bottom board (8) to left side panel (4) and right side panel (3) by inserting cam bolts
(B) and wood dowels (A) into holes on left side panel (4) and right side panel (3).
4. Insert 2 cam locks (C) into cam lock holes on left side panel (4) and right side panel (3),
then rotate clockwise to secure cam bolts (B) in place.
5. Attach magnet (H) to top board (7) by inserting 2 screws (H) through holes on magnet (H),
then tighten to bottom of top board (7).
6. Screw 2 cam bolts (B) into cam bolt holes on top board (7).
7. Insert 4 wood dowels (A) into dowel holes on the bottom of top board (7).
8. Attach top board (7) to left side panel (4) and right side panel (3) by inserting 4 wood dowels
(A) and 2 cam bolts (B) into dowel holes and cam lock holes on left side panel (4) and right
side panel (3).
9. Insert 2 cam locks (C) into cam lock holes on left side panel (4) and right side panel (3),
then rotate clockwise to secure cam bolts (B) in place.