Installation Guide
STEP 6
1. Attach upper back board (9) and middle back board (10) together by sliding into plastic
connection strip (N).
2. Attach upper back board (9) and middle back board (10) to cabinet by inserting screws (G)
through holes on upper back board (9) and middle back board (10), then tighten into
cabinet.
3. Attach lower back board (11) to cabinet by inserting screws (G) through holes on lower
back board (11), then tighten into cabinet.
STEP 7
1. Attach left door (1) to left support panel (14) by inserting 4 screws (D) through holes on
metal hinges (E), then tighten to left door (1).
2. Repeat above step to assemble right door (2).