Instructions / Assembly

STEP 1

1. Attach 1 magnet plate (F) to left door (1) by inserting 1 wood screw (D) through hole on magnet plate(F) then

tighten into left door (1) by using a Philips screwdriver.

2. Attach 1 handle (K) to left door (1) by inserting 2 Machine screws (J) through holes on left door (1) then tighten

to handle (K) by using a Philips screwdriver.

3. Repeat the above steps to assemble another magnet plate (F) & handle (K) to right door (2).

STEP 2

1. Insert 2 wood dowels (A) into dowel holes on the right support board (13) .

2. Screw 3 cam bolts (B) into the pre-threaded holes on the right support board (13) by using a Philips screwdriver.

3. Attach 2 metal hinges (E) to the right support board (13).

4. Insert 4 wood screws (D) through holes on the 2 metal hinges (E) then tighten to the right support board (13) by

using a Philips screwdriver.

5. Repeat the above steps for left support board (14).