Instructions / Assembly

STEP 3

1. Attach left support board (14) to left side panel (4) by inserting 2 wood dowels (A) into the dowel holes and

inserting 3 cam bolts (B) into cam lock holes in the left side panel (4).

2. Insert 3 cam locks (C) into the cam lock holes on the left side panel (4) separately then rotate clockwise to

secure cam bolts (B) in place by using a Philips screwdriver.

3. Repeat the above step to assemble right side panel (3) and right support board (13).

STEP 4

1. Screw in 2 cam bolts (B) into the pre-threaded hole on left side panel (4) and right side panel (3) .

2. Insert 8 wood dowels (A) into dowel holes on left side panel (4) and right side panel (3).

3. Attach the cross bar (5) to left side panel (3) by inserting 2 wood dowels (A) into dowel holes on the

cross bar (5).

4.Attach the shelf (6) to left side panel (4 ) by inserting 1 cam bolt (B) and 2 wood dowels (A) into holes on the shelf

(6), then insert 1 cam lock (C) into cam lock hole on the shelf (6) and rotate clockwise to secure the cam bolt (B)

in place by using a Philips screwdriver.

5.Attach right side panel (4) to the cross bar (5) and shelf (6) by inserting 2 wood dowels (A) into holes on the

cross bar (5), and inserting cam bolt (B) and 2 wood dowels (A) into holes on the shelf (6).

6. Insert 1 cam lock (C) into the cam lock hole on the shelf (6) and rotate clockwise to secure the cam bolt (B) in

place by using a Philips screwdriver.