Instructions / Assembly

STEP 5

1. Screw in 2 cam bolts (B) into the pre-threaded holes on bottom board (8) by using a Philips screwdriver.

2. Insert 4 wood dowels (A) into dowel holes on bottom board (8).

3. Attach the bottom board (8) to left side panel (4) and right side panel (3) by inserting cam bolts (B) and wood

dowels (A) into holes on left side panel (4) and right side panel (3).

4. Insert 2 cam lock (C) into cam lock hole on left side panel (4) and right side panel (3) separately, then rotate

clockwise to secure 2 cam bolts (B) in place by using a Philips screwdriver.

5. Attach the magnet (H) to top board (7) by inserting 2 wood screws (G) through holes on the magnet (H) then

tighten to bottom of top board (7).

6. Screw in 2 cam bolts (B) into the pre-threaded holes on top board (7) by using a Philips screwdriver.

7. Insert 4 wood dowels (A) into dowel holes on the bottom of top board (7)..

8. Attach top board (7) to left side panel (4) & right side panel (3) by inserting 4 wood dowels (A) and 2 cam bolts (B)

into dowel holes and cam lock holes on left side panel (4) and right side panel (3).

9. Insert 2 cam lock (C) into cam lock holes on left side panel (4) and right side panel(3), then rotate clockwise to

secure cam bolts (B) in place by using a Philips screwdriver.