Instructions / Assembly

STEP 6

1. Attach upper back board (9) & middle back board (10) together sliding into plastic connection strip (N).

2. Attach upper back board (9) and middle back board (10) to the cabinet by inserting wood screws (G) through

holes on upper back board (9) and middle back board (10) then tighten into the cabinet by using a Philips

screwdriver.

3. Attach lower back board (11) to the cabinet by inserting wood screws (G) through holes on lower back board (11)

then tighten into the cabinet by using a Philips screwdriver.

STEP 7

1. Attach left door (1) to left support panel (14) by inserting 4 wood screws (D) through holes on the metal hinges

(E) then tighten to left door (1) by using a Philips screwdriver.

2. Repeat the above step to assemble the right door (2).