Instructions / Assembly

STEP 8

1. Insert 2 plastic anchors (L) into the wall at the desired position.

2. Attach the pre-assembled wall cabinet in place w/holes on the wall, then insert 2 long wood screws (M)

through holes on the cross bar (5) and tighten into 2 plastic anchors (L) in the wall.

STEP 9

1. Insert 4 plastic holders (I) into holes on left side panel (4) and right side panel(3)

2. Make sure these 4 shelf holders (I) are on the same height.

3. Put the adjustable shelf (12) onto the shelf holders (I).