ASSEMBLY INSTRUCTIONS RiverRidge® Ashland Tall Cabinet ITEM#: 06-082 ITEM#: 06-083 ITEM#: 06-124 White Gray Espresso ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. During assembly children should be kept away from the product due to possible risk of injury.
THIS CABINET WILL HOLD UP TO 20 POUNDS PER SHELF AND 10 POUNDS PER DRAWER OR A TOTAL OF 130 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS OR THE DRAWER WITH MORE THAN 10 POUNDS. OVERLOADING THE CABINET MAY CAUSE DAMAGE TO THE CABINET OR CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST NO QTY DESCRIPTION 1 1PC Top Board 2 1PC Lower Left Side Panel 3 1PC Lower Right Side Panel 4 1PC Lower Back Panel 5 1PC Upper Cross Bar 6 1PC Adjustable Shelf 7 1PC Bottom Board 8 1PC Decorative Panel 9 1PC Door 10 1PC Drawer Back Board 11 2PCS Drawer Side Panel 12 1PC Drawer Bottom Board 13 1PC Drawer Front Board 14 1PC Upper Left Side Panel 15 1PC Upper Right Side Panel 16 2PCS Fixed Shelf 17 1PC Upper Back Panel 18 1PC Middle Connection
NO PARTS QTY DESCRIPTION A B C D E F G H 18PCS Cam Bolt 18PCS Cam Lock 26PCS Wood Dowel 14PCS Screw (3x10mm) 2PCS Drawer Holder 8PCS Screw (3.5x25mm) 24PCS Screw (2.
STEP 1 1. 2. Screw 2 cam bolts (A) in cam bolt holes on upper left side panel (14). Screw 2 cam bolts (A) in cam bolt holes on upper right side panel (15). STEP 2 1. 2. 3. 4. Insert 8 wood dowels (C) into wood dowel holes on upper left side panel (14) and upper right side panel (15). Attach upper right side panel (15) to fixed shelf (16) by inserting cam bolts (A) into cam lock holes on end of open shelf (16) and inserting wood dowels (C) into wood dowel holes on fixed shelf (16).
STEP 3 1. 2. 3. 4. 5. Insert 1 screw (Q) through hole on adjustable anchor bracket (P), then tighten to top board (1). Screw 4 cam bolts (A) into cam bolt holes on top board (1). Insert 4 wood dowels (C) into wood dowel holes on top board (1). Attach top board (1) to upper left side panel (14) and upper right side panel (15) by inserting cam bolts (A) into cam lock holes and inserting wood dowels (C) into wood dowel holes on end of upper left side panel (14) and upper right side panel (15).
STEP 5 1. 2. 3. 4. 5. Screw 3 cam bolts (A) into cam bolt holes on lower left side panel (2). Attach drawer holder (E) to lower left side panel (2) by inserting 2 screws (D) through holes on drawer holder (E) then tighten to lower left side panel (2). Attach magnet (M) to lower left side panel (2) by inserting 2 screws (N) through holes on magnet (M), then tighten to lower left side panel (2). Screw 3 cam bolts (A) into cam bolt holes on lower right side panel (3).
STEP 7 1. 2. 3. Insert 4 wood dowels (C) into wood dowel holes on middle connection board (18). Attach upper pre-assembled unit to lower pre-assembled unit by inserting wood dowels (C) into wood dowel holes and inserting cam bolts (A) into cam lock holes on end of lower side panels (2) and (3). Insert 4 cam locks (B) into cam lock holes on lower side panels (2) and (3), rotate clockwise to secure cam bolts (A) in place. STEP 8 1.
STEP 9 1. 2. 3. 4. 5. 6. Attach 1 drawer side panel (11) to drawer back board (10) by inserting 2 screws (F) through holes on drawer side panel (11), then tighten to drawer back board (10). Repeat above step to assemble another drawer side panel (11) to drawer back board (10). Slide drawer bottom board (12) into grooves on both drawer side panels (11).
STEP 10 1. 2. 3. 4. 5. 6. Attach magnet plate (L) to door (9) by inserting 2 screws (D) through holes on magnet plate (L), then tighten to door (9). Attach 2 metal hinges (I) to door (9) by inserting 4 screws (D) through holes on metal hinges (I), then tighten to door (9). Attach knob (J) to door (9) by inserting 1 machine screw (K) through hole on door (9), then tighten to knob (J).
STEP 11 Option #1: Securing to Drywall 1. Position cabinet against wall in desired location. Using a pencil, make small mark on wall through hole on bracket (P). Move cabinet away from wall and screw 1 plastic anchor (R) into wall on pencil mark. 2. Place cabinet against wall, insert 1 screw (S) through hole on brackets (P), then tighten to plastic anchor (R). Option #2: Securing to Drywall and Wood Stud 1. Position cabinet against wall in desired location.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. WARNING Please make sure your item is secured to the wall, per assembly instructions. CARE INSTRUCTIONS: Wipe clean with a water dampened cloth. Wipe dry with clean cloth. IMPORTANT: Keep assembly instructions for future reference.
Enjoy your new RiverRidge® Cabinet! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States. If purchased outside of the United States, please contact retailer where purchased. RiverRidge® is a registered trademark of Sourcing Solutions, Inc.