Installation Guide

STEP 7
1. Insert 2 wood dowels (A) into wood dowel holes on top bar (11).
2. Screw 2 cam bolts (B) into cam bolt holes on top bar (11).
3. Attach top bar (11) to left side front leg (12) and left side rear leg (13) by inserting wood
dowels (A) into wood dowel holes and inserting 2 cam bolts (B) into cam lock holes on left
side front leg (12) and left side rear leg (13).
4. Insert 2 cam locks (C) into cam lock holes on left side front leg (12) and left side rear leg (13),
then rotate clockwise to secure cam bolts in place.
5. Repeat above steps to assemble other top bar (11) to right side front leg (14) and right side
rear leg (15).
1. Attach top shelf (7) and rail boards to right-side frame by inserting 2 machine screws (D)
through holes on right rail board (2) and tighten to pre-assembled right-side frame.
2. Repeat above step to attach middle and bottom shelves (8) to pre-assembled right-side frame.
STEP 8