Installation Guide

1. Attach pre-assembled shelf #1 to pre-assembled left-side frame by inserting 2 machine
screws (D) through holes on left rail board (3) and tighten to pre-assembled left-side frame.
2. Repeat above step to attach shelf #2, #3 and #4 to pre-assembled left-side frame.
STEP 11
STEP 12
Option #1: Securing to Drywall
1. Position shelf against wall in desired location. Using a pencil, make small mark on wall through
hole on bracket (J). Move shelf away from wall and screw 1 plastic anchor (H) into wall on
pencil mark.
2. Place shelf against wall, insert 1 screw (F) through hole on bracket (J), then tighten to plastic
anchor (H).
Option #2: Securing to Drywall and Wood Stud
1. Position shelf against wall in desired location. Insert 1 screw (F) through hole on bracket (J), then
tighten through drywall and into wood stud.
*Tip: Anchor bracket (J) can be adjusted to correct distance from wall to cabinet as needed. Once adjusted,
be sure to re-tighten bracket inside cabinet for stability.