Installation Guide

STEP 9
STEP 10
1. Insert 2 wood dowels (A) into wood dowel holes on top bar (14).
2. Screw 2 cam bolts (B) into cam bolt holes on top bar (14).
3. Attach top bar (14) to left front leg (15) and left rear leg (16) by inserting wood dowels (A) into
wood dowel holes and inserting cam bolts (B) into cam lock holes on left front leg (15) and
left rear leg (16).
4. Insert 2 cam locks (C) into cam lock holes on left front leg (15) and left rear leg (16), then
rotate clockwise to secure cam bolts in place.
5. Repeat above steps to assemble another top bar (14) to right side front leg (17) and right side
rear leg (18).
1. Attach pre-assembled shelf #1 to pre-assembled right-side frame by inserting 2 machine
screws (D) through holes on right rail board (4) and tighten to pre-assembled right-side frame.
2. Repeat above step to attach shelf #2, #3 and #4 to pre-assembled right-side frame.