Installation Guide

STEP 9
1. Attach pre-assembled top shelf (7) and rail boards to upper left side frame (13) by inserting 2 machine
screws (C) through holes on top shelf left rail board (1) and tighten to upper left side frame (13).
2. Repeat above step to assemble middle shelf (8) and bottom shelf (9) to upper left side frame (13).
3. Attach bottom rear cross bar (12) to bottom left side frame (15) by inserting 2 screws (B) through holes
on bottom left side frame (15) and tighten to bottom rear cross bar (12).
STEP 10
1. Attach 1 bracket (H) to top rear rail board (11) by inserting 1 wood screw (F) through hole on bracket (H)
and tighten to top rear rail board (11).
2. Drill hole on wall at same height of bracket (H) on spacesaver and insert plastic anchor (G) into hole.
4.Attach 1 bracket (H) to plastic anchor (G) on wall by inserting 1 wood screw (E) through hole on bracket (H)
and tighten into plastic anchor (G).