ASSEMBLY INSTRUCTIONS RiverRidge® Madison Two-Door Floor Cabinet ITEM#: 06-110 ITEM#: 06-121 White Gray ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. During assembly children should be kept away from the product due to possible risk of injury. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over.
THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR TOP BOARD FOR A TOTAL OF 60 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS OR 60 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 20 POUNDS PER SHELF OR 60 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM THE WALL AND CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST NO QTY DESCRIPTION 1 1PC Top Board 2 1PC Bottom Board 3 1PC Left Side Panel 4 1PC Right Side Panel 5 1PC Cross Bar 6 1PC Adjustable Shelf 7 1PC Left Door 8 1PC Right Door 9 1PC Upper Back Panel 10 1PC Lower Back Panel
PARTS LIST NO PARTS QTY DESCRIPTION A 8PCS Cam Bolt B 8PCS Cam Lock C 8PCS Wood Dowel D 4PCS Shelf Holder E 4PCS Hinge F 2PCS Handle G 24PCS Screw (4x12mm) H 1PC Plastic Connection Strip I 2PCS Screw (4x14mm) J 2PCS Adjustable Anchor Bracket K 16PCS Screw (2.5x10mm) L 2PCS Plastic Anchor M 2PCS Screw (4x30mm) N 4PCS Screw (3.
STEP 1 1. 2. Screw 4 cam bolts (A) into cam bolt holes on top board (1). Attach 2 brackets (J) to top board (1) by inserting 2 screws (I) through holes on bracket (J) and tighten to top board (1). STEP 2 1. 2. Screw 2 cam bolts (A) into cam bolt holes on left side panel (3). Screw 2 cam bolts (A) into cam bolt holes on right side panel (4). STEP 3 1. 2. Insert 4 wood dowels (C) into wood dowel holes on left side panel (3).
STEP 4 1. 2. Attach top board (1) to left side panel (3) and right side panel (4) by inserting cam bolts into cam lock holes on left side panel (3) and right side panel (4). Insert 4 cam locks (B) into cam lock holes on left side panel (3) and right side panel (4), then rotate clockwise to secure cam bolts in place. STEP 5 1. 2. Attach upper back board (9) and lower back board (10) together by sliding into plastic connection strip (H).
STEP 6 1. 2. 3. Attach 2 hinges (E) to left door (7) by inserting 4 screws (G) through holes on hinges (E), then tighten to left door (7). Attach handle (F) to left door (7) by inserting 2 screws (N) through holes on handle (F), then tighten to left door (7). Repeat above steps to assemble hinges (E) and handle (F) to right door (8). STEP 7 Door Adjustments 1. 2. Attach left door (7) to cabinet by inserting 8 screws (G) through holes on hinges (E) then tighten to left side panel (3).
STEP 8 Option #1: Securing to Drywall 1. Position cabinet against wall in desired location. Using a pencil, make two small marks on wall through holes on brackets (J). Move cabinet away from wall and screw 2 plastic anchors (L) into wall on pencil marks. 2. Place cabinet against wall, insert 2 screws (M) through holes on brackets (J), then tighten to plastic anchors (L). Option #2: Securing to Drywall and Wood Stud 1. Position cabinet against wall in desired location.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. WARNING Please make sure your item is secured to the wall, per assembly instructions. CARE INSTRUCTIONS: Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
Enjoy your new RiverRidge® Cabinet! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States. If purchased outside of the United States, please contact retailer where purchased. RiverRidge® is a registered trademark of Sourcing Solutions, Inc.