ASSEMBLY INSTRUCTIONS RiverRidge® Madison Tall Corner Cabinet ITEM#: 06-112 ITEM#: 06-123 White Gray ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. During assembly children should be kept away from the product due to possible risk of injury. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over.
THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR A TOTAL OF 100 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS OR 100 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 20 POUNDS PER SHELF OR 100 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM THE WALL AND CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST NO QTY DESCRIPTION 1 2 3 4 5 6 1PC 2PCS 2PCS 1PC 1PC 1PC Top Board Adjustable Shelf Shelf Middle Connection Board Upper Left Side Board Upper Right Side Board 7 8 9 10 11 12 13 14 15 16 17 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 2PC 1PC 1PC Upper Left Support Bar Upper Right Support Bar Lower Left Side Board Lower Right Side Board Lower Left Support Bar Lower Right Support Bar Upper Cross Bar Lower Cross Bar Wood Block Left Door Right Door
NO A PARTS LIST PARTS QTY DESCRIPTION 4PCS Cam Bolt B 4PCS Cam Lock C 30PCS Wood Dowel (6x30mm) D 6PCS Wood Dowel (6x50mm) E 8PCS Shelf Holder F 2PCS Handle G 4PCS Screw (3.
STEP 1 1. Screw 4 cam bolts (A) into cam bolt holes on middle connection board (4). Do not overtighten. STEP 2 1. 2. Insert 4 wood dowels (C) into wood dowel holes on upper cross bar (13). Attach upper left support bar (7) and upper right support bar (8) to upper cross bar (13) by inserting wood dowels into wood dowel holes on upper left support bar (7) and upper right support bar (8). STEP 3 1. 2. 3. Insert 2 wood dowels (C) into wood dowel holes on upper right side board (6).
STEP 4 1. 2. 3. Insert 4 wood dowels (C) into wood dowel holes on upper left side board (5). Attach upper left side board (5) to upper right side board (6) and shelf (3) by inserting wood dowels into wood dowel holes on upper right side board (6) and shelf (3). Insert 5 screws (N) through holes on upper left side board (5), then tighten to upper right side board (6) and shelf (3). Do not overtighten. STEP 5 1.
STEP 6 1. 2. 3. 4. Insert 8 wood dowels (C) into wood dowel holes on top board (1). Attach top board (1) to upper left side board (5), upper right side board (6), upper left support bar (7), upper right support bar (8) and upper cross bar (13) by inserting wood dowels into wood dowel holes on upper left side board (5), upper right side board (6), upper left support bar (7), upper right support bar (8) and upper cross bar (13).
STEP 8 1. 2. 3. 4. 5. Attach magnet (H) to wood block (15) by inserting 2 screws (J) through holes on magnet (H) and tighten to wood block (15). Repeat step 1 to assemble another magnet (H) to wood block (15). Attach 2 wood blocks (15) to lower cross bar (14) by inserting 4 screws (M) through holes on wood blocks (15) then tighten to lower cross bar (14). Attach 2 hinges (K) to lower left support bar (11) by inserting 4 screws (J) through holes on hinges (K), then tighten to lower left support bar (11).
STEP 10 1. 2. 3. Insert 2 wood dowels (C) into wood dowel holes on lower right side board (10). Attach lower right side board (10) to shelf (3) by inserting wood dowels into wood dowel holes on shelf (3). Insert 2 screws (N) through holes on lower right side board, then tighten to shelf (3). Do not overtighten. STEP 11 1. 2. 3. Insert 4 wood dowels (C) into wood dowel holes on lower left side board (9).
STEP 12 1. Attach assembled lower left side board (9) and lower right side board (10) to lower left support bar (11) and lower right support bar (12) by inserting 6 screws (L) through holes on lower left side board (9) and lower right side board (10), then tighten to lower left support bar (11) and lower right support bar (12). Do not overtighten. STEP 13 1. 2. 3. Attach 1 handle (F) to left door (16) by inserting 2 screws (G) through holes on handle (F), then tighten to left door (16).
STEP 14 1. 2. 3. 4. Insert 2 wood dowels (C) into wood dowel holes on middle connection board (4). Attach upper section to lower section by inserting wood dowels (C) and (D) into wood dowel holes on lower left side board (9), lower right side board (10), lower left support bar (11), lower right support bar (12) and lower cross bar (14) and inserting cam bolts into cam lock holes on lower left side board (9) and lower right side board (10).
STEP 15 1. 2. Attach left door (16) to cabinet by inserting 4 screws (J) through holes on hinges (K), then tighten to left door (16). Attach right door (17) to cabinet by inserting 4 screws (J) through holes on hinges (K), then tighten to right door (17).
STEP 16 Option #1: Securing to Drywall 1. 2. Position cabinet against wall in desired location. Using a pencil, make 4 small marks on wall through holes on inside of cabinet. Move cabinet away from wall and screw 4 plastic anchors (O) into wall on pencil marks. Place cabinet against wall, insert 4 screws (P) through holes on side boards, then tighten to plastic anchors (O). Option #2: Securing to Drywall and Wood Stud 1. Position cabinet against wall in desired location.
STEP 17 1. 2. Insert 8 shelf holders (E) into desired position. Place adjustable shelves (2) onto 8 shelf holders (E).
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. WARNING Please make sure your item is secured to the wall, per assembly instructions. CARE INSTRUCTIONS: Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
Enjoy your new RiverRidge® Cabinet! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States. If purchased outside of the United States, please contact retailer where purchased. RiverRidge® is a registered trademark of Sourcing Solutions, Inc.