Installation Guide

STEP 8
1. Attach magnet (H) to wood block (15) by inserting 2 screws (J) through holes on magnet
(H) and tighten to wood block (15).
2. Repeat step 1 to assemble another magnet (H) to wood block (15).
3. Attach 2 wood blocks (15) to lower cross bar (14) by inserting 4 screws (M) through holes
on wood blocks (15) then tighten to lower cross bar (14).
4. Attach 2 hinges (K) to lower left support bar (11) by inserting 4 screws (J) through holes on
hinges (K), then tighten to lower left support bar (11).
5. Repeat above step to assemble 2 hinges (K) to lower right support bar (12).
STEP 9
1. Insert 4 wood dowels (C) into wood dowel holes on lower cross bar (14).
2. Attach lower left support bar (11) and lower right support bar (12) to lower cross bar
(14) by inserting wood dowels into wood dowel holes on lower left support bar (11) and
lower right support bar (12).