ASSEMBLY INSTRUCTIONS RiverRidge® Madison Tall Corner Cabinet ITEM #: 06-112 White ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over. Don’t use this item for a TV stand or place heavy objects on top of item.
THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR A TOTAL OF 100 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS OR 100 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH. MORE THAN 20 POUNDS PER SHELF OR 100 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM THE WALL AND CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST NO QTY DESCRIPTION 1 2 3 4 1PC 2PCS 2PCS 1PC Top Board Adjustable Shelf Shelf Middle Connection Board 5 6 1PC 1PC Upper Left Side Board Upper Right Side Board 7 8 1PC 1PC Upper Left Support Bar Upper Right Support Bar 9 10 1PC 1PC Lower Left Side Board Lower Right Side Board 11 12 13 14 15 16 17 1PC 1PC 1PC 1PC 2PC 1PC 1PC Lower Left Support Bar Lower Right Support Bar Upper Cross Bar Lower Cross Bar Wood Block Left Door Right Door
NO A B C D E F G H I J K L M N O P PARTS LIST PARTS QTY DESCRIPTION 4PCS Cam Bolt 4PCS Cam Lock 30PCS Wood Dowel (6 x 30mm) 6PCS Wood Dowel (6 x 50mm) 8PCS Metal Shelf Holder 2PCS Handle 4PCS Screw (4 x 12mm) 2PCS Magnet 2PCS Magnet Plate 22PCS Screw (3 x 12mm) 4PCS Hinge 12PCS Screw (4 x 25mm) 6PCS Screw (4 x 30mm) 22PCS Screw (4 x 35mm) 4PCS Plastic Anchor 4PCS Screw (5 x 45mm) TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED) THE USE OF POWER SCREWDRI
STEP 1 1. Screw 4 cam bolts (A) into pre-threaded holes on middle connection board (4). STEP 2 1. Insert 4 wood dowels (C) into wood dowel holes on upper cross bar (13). 2. Attach upper left support bar (7) and upper right support bar (8) to upper cross bar (13) by inserting wood dowels into wood dowel holes on upper left support bar (7) and upper right support bar (8). STEP 3 1. Insert 2 wood dowels (C) into wood dowel holes on upper right side board (6). 2.
STEP 4 1. Insert 4 wood dowels (C) into wood dowel holes on upper left side board (5). 2. Attach upper left side board (5) to upper right side board (6) and shelf (3) by inserting wood dowels into wood dowel holes on upper right side board (6) and shelf (3). 3. Insert 5 screws (N) through holes on upper left side board (5), then tighten to upper right side board (6) and shelf (3). STEP 5 1.
STEP 6 1. Insert 8 wood dowels (C) into wood dowel holes on top board (1). 2. Attach top board (1) to upper left side board (5), upper right side board (6), upper left support bar (7), upper right support bar (8) and upper cross bar (13) by inserting wood dowels into wood dowel holes on upper left side board (5), upper right side board (6), upper left support bar (7), upper right support bar (8) and upper cross bar (13). 3.
STEP 8 1. Attach magnet (H) to wood block (15) by inserting 2 screws (J) through holes on magnet (H) and tighten to wood block (15). 2. Repeat step 1 to assemble another magnet (H) to wood block (15). 3. Attach 2 wood blocks (15) to lower cross bar (14) by inserting 4 screws (M) through holes on wood blocks (15) then tighten to lower cross bar (14). 4. Attach 2 hinges (K) to lower left support bar (11) by inserting 4 screws (J) through holes on hinges (K) then tighten to lower left support bar (11). 5.
STEP 10 1. Insert 2 wood dowels (C) into wood dowel holes on lower right side board (10). 2. Attach lower right side board (10) to shelf (3) by inserting wood dowels into wood dowel holes on shelf (3). 3. Insert 2 screws (N) through holes on lower right side board, then tighten to shelf (3). STEP 11 1. Insert 4 wood dowels (C) into wood dowel holes on lower left side board (9). 2.
STEP 12 1. Attach assembled lower left side board (9) and lower right side board (10) to lower left support bar (11) and lower right support bar (12) by inserting 6 screws (L) through holes on lower left side board (9) and lower right side board (10), then tighten to lower left support bar (11) and lower right support bar (12). STEP 13 1. Attach 1 handle (F) to left door (16) by inserting 2 screws (G) through holes on handle (F), then tighten to left door (16). 2.
STEP 14 1. Insert 2 wood dowels (C) into wood dowel holes on middle connection board (4). 2. Attach upper section to lower section by inserting wood dowels (C) and (D) into wood dowel holes on lower left side board (9), lower right side board (10), lower left support bar (11), lower right support bar (12) and lower cross bar (14) and inserting cam bolts into cam lock holes on lower left side board (9) and lower right side board (10). 3.
STEP 15 1. Attach Left door (16) to cabinet by inserting 4 screws (J) through holes on hinges (K), then tighten to left door (16). 2. Attach right door (17) to cabinet by inserting 4 screws (J) through holes on hinges (K), then tighten to right door (17).
STEP 16 1. Place drawing with hole positions on wall in desired location and drill 4 holes on wall. 2. Insert 4 plastic anchors (O) into holes on wall. 3. Align holes on cabinet with holes on wall and insert 4 screws (P) through holes on cabinet and tighten to plastic anchors (O) in wall.
STEP 17 1. Insert 8 metal holders (E) into desired position. 2. Place adjustable shelves (2) onto 8 metal holders (E).
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. WARNING Please make sure your item is secured to the wall, per assembly instructions.
Enjoy your new RiverRidge® Cabinet! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com RiverRidge® is a registered trademark of Sourcing Solutions, Inc.