ASSEMBLY INSTRUCTIONS RiverRidge® Madison Linen Tower with Open Shelves ITEM#: 06-108 ITEM#: 06-119 White Gray ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. During assembly children should be kept away from the product due to possible risk of injury. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over.
THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR A TOTAL OF 120 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS OR 120 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 20 POUNDS PER SHELF OR 120 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM THE WALL AND CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST NO QTY DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 15 1PC 2PCS 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC Top Board Upper Shelf Middle Connection Board Lower Shelf Lower Adjustable Shelf Bottom Board Upper Front Cross Bar Lower Cross Bar Upper Left Side Frame Lower Left Side Panel Lower Right Side Panel Door Back Board Upper Right Side Frame
NO PARTS PARTS LIST QTY DESCRIPTION A 24PCS Cam Bolt B 24PCS Cam Lock C 28PCS Wood Dowel D 4PCS Shelf Holder E 2PCS Hinge F 1PC Handle G 12PCS Screw (4x12mm) H 2PCS Screw (4x30mm) I 4PCS Screw (4x35mm) J 14PCS Screw (2.5x10mm) K 2PCS Plastic Anchor L 2PCS Adjustable Anchor Bracket M 2PCS Screw (4x12mm) N 2PCS Screw (3.
STEP 1 1. 2. 3. Screw 4 cam bolts (A) into cam bolt holes on top board (1). Attach adjustable anchor brackets (L) to top board (1) by inserting 2 screws (M) through holes on brackets (L), then tighten to top board (1). Screw 4 cam bolts (A) into cam bolt holes on middle connection board (3). STEP 2 1. 2. Screw 4 cam bolts (A) into cam bolt holes on upper left side frame (9). Repeat above step for upper right side frame (15). STEP 3 1. 2.
STEP 4 1. 2. 3. 4. Insert 6 wood dowels (C) into wood dowel holes on upper left side frame (9). Attach upper left side frame (9) to upper front cross bar (7) and upper shelves (2) by inserting wood dowels (C) into wood dowel holes on upper front cross bar (7) and inserting cam bolts (A) into cam lock holes on upper shelves (2). Insert 4 cam locks (B) into cam lock holes on upper shelves (2) then rotate clockwise to secure the cam bolts (A) in place.
STEP 6 1. 2. 3. 4. Insert 6 wood dowels (C) into wood dowel holes on lower left side panel (10). Attach lower left side panel (10) to lower cross bar (8), lower shelf (4) and bottom board (6) by inserting wood dowels (C) into wood dowel holes on lower cross bar (8) and inserting cam bolts and wood dowels into cam lock holes on lower shelf (4) and bottom board (6). Insert 4 cam locks (B) into cam lock holes on lower shelf (4) and bottom board (6), then rotate clockwise to secure cam bolts (A) in place.
STEP 8 1. Attach back board (13) to cabinet by inserting 14 screws (J) through holes on back board (13), then tighten to back of cabinet. STEP 9 1. 2. Attach 2 hinges (E) to door (12) by inserting 4 screws (G) through holes on hinges (E), then tighten to door (12). Attach handle (F) to door (12) by inserting 2 screws (N) through holes on handle (F), then tighten to door (12).
STEP 10 Door Adjustments 1. 2. Attach door (12) to cabinet by inserting 8 screws (G) through holes on hinges (E), then tighten to lower left side panel (10). Note: Tightening screw in position “a” will adjust door up or down; tightening screw in position “b” will adjust door to or from cabinet and tightening screw in position “c” will adjust door side to side.
STEP 11 Option #1: Securing to Drywall 1. Position cabinet against wall in desired location. Using a pencil, make two small marks on wall through holes on brackets (L). Move cabinet away from wall and screw 2 plastic anchors (K) into wall on pencil marks. 2. Place cabinet against wall, insert 2 screws (H) through holes on brackets (L), then tighten to plastic anchors (K). Option #2: Securing to Drywall and Wood Stud 1. Position cabinet against wall in desired location.
STEP 12 1. 2. Insert 4 shelf holders (D) into holes at desired positions. Place lower adjustable shelf (5) onto shelf holders (D). ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. WARNING Please make sure your item is secured to the wall, per assembly instructions. CARE INSTRUCTIONS: Wipe clean with a water dampened cloth.
Enjoy your new RiverRidge® Cabinet! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States. If purchased outside of the United States, please contact retailer where purchased. RiverRidge® is a registered trademark of Sourcing Solutions, Inc.