ASSEMBLY INSTRUCTIONS RiverRidge® Woodbury Hall Tree w/ Bench ITEM #: 16-029 ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over. Don’t use this item for a TV stand or place heavy objects on top of item.
THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF AND CUBBY FOR TOTAL OF 80 POUNDS. BENCH SEATING WEIGHT CAPACITY IS 200 POUNDS. DO NOT LOAD SHELVES OR CUBBIES WITH MORE THAN 20 POUNDS OR SEATING WITH MORE THAN 200 POUNDS. OVERLOADING WITH MORE THAN 20 POUNDS PER SHELF OR 200 POUNDS SEATING MAY CAUSE DAMAGED TO THE SHELF OR SERIOUS INJURY OR DEATH.
PARTS LIST NO QTY DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 2PCS 2PCS 1PC 4PCS Upper Rear Board Upper Shelf Middle Rear Board Vertical Support Board Lower Rear Board Top Board Cross Bar Shelf Divider Board Bottom Board Upper Left Side Panel Upper Right Side Panel Lower Left Side Panel Lower Right Side Panel Door Upper Back Board Lower Back Board Metal Leg
PARTS LIST NO A B C D E F G H I J K L M N O P Q PART QTY DESCRIPTION 14PCS Cam Bolt 14PCS Cam Lock 38PCS 8PCS 8PCS 8PCS 4PCS 24PCS 3PCS 7PCS 34PCS 1PC 2PCS 4PCS 2PCS 1PC 1PC Wood Dowel (8x30mm) Screw (4X35mm) Machine Screw (6x30mm) Shim Hinge Screw (4x14mm) Metal Hook (4x14mm) Screw (3x12mm) Screw (2.
STEP 1 1. Screw 3 cam bolts (A) into pre-threaded holes on upper left side panel (11). 2. Screw 3 cam bolts (A) into pre-threaded holes on upper right side panel (12). STEP 2 1. Screw 4 cam bolts (A) into pre-threaded holes on top board (6). STEP 3 1. Screw 4 cam bolts (A) into pre-threaded holes on lower left side panel (13) and lower right side panel (14).
STEP 4 1. Insert 4 wood dowels (C) into wood dowel holes on vertical support board (4). 2. Attach middle rear board (3) and lower rear board (5) to vertical support board (4) by inserting wood dowels (C) into wood dowel holes on middle rear board (3) and lower rear board (5). STEP 5 1. Insert 8 wood dowels (C) into wood dowel holes on upper right side panel (12). 2.
STEP 6 1. Insert 8 wood dowels (C) into wood dowel holes on upper left side panel (11). 2. Attach upper left side panel (11) to upper rear board (1), upper shelf (2), middle rear board (3) and lower rear board (5) by inserting wood dowels (C) into wood dowel holes and insert cam bolts (A) into cam lock holes on upper rear board (1), upper shelf (2), middle rear board (3) and lower rear board (5). 3.
STEP 8 1. Insert 2 wood dowels (C) into wood dowel holes on top board (6). 2. Attach bottom board (6) to upper left side panel (11) and upper right side panel (12) by inserting wood dowels (C) into wood dowel holes on upper left side panel (11) and upper right side panel (12). 3. Insert 4 screws (D) through holes on top board (6), then tighten to upper left side panel (11) and upper right side panel (12). STEP 9 1.
STEP 10 1. Insert 2 wood dowels (C) into wood dowel holes on divider board (9). 2. Attach divider board (9) to shelf (8) by inserting wood dowels (C) into wood dowel holes on shelf (8). 3. Insert 6 wood dowels (C) into wood dowel holes on bottom board (10). 4. Attach bottom board (10) to lower left side panel (13), lower right side panel (14) and divider board (9) by inserting wood dowels (C) into wood dowel holes on lower left side panel (13), lower right side panel (14) and divider board (9). 5.
STEP 12 1. Insert 4 wood dowels (C) into wood dowel holes on top board (6). 2. Place cross bar (7) onto grooves on lower left side panel (13) and lower right side panel (14). 3. Attach pre-assembled upper section to pre-assembled lower section by inserting wood dowels (C) into wood dowel holes and inserting cam bolts (A) into cam lock holes on lower left side panel (13) and lower right side panel (14). 4.
STEP 13 1. Attach lower back board (17) to back of cabinet by inserting 10 screws (K) through holes on lower back board (17), then tighten to back of cabinet. STEP 14 1. Attach 2 hinges (G) to door (15) by inserting 4 screws (H) through holes on hinges (G), then tighten to door (15). 2. Attach handle (M) to door (15) by inserting 2 screws (N) through holes on door (15), then tighten to handle (M). 3. Repeat above steps for another door (15).
Door Adjustments 1. Attach 1 door (15) to cabinet by inserting 8 screws (H) through holes on hinges (G), then tighten to lower left side panel (13). 2. Attach 1 door (15) to cabinet by inserting 8 screws (H) through holes on hinges (G), then tighten to lower right side panel (14). 3. Attach 3 metal hooks (I) to middle rear board (3) by inserting 6 screws (J) through holes on metal hooks (I), then tighten to middle rear board (3). 4.
STEP 16 1. Place drawing with hole position in desired location and drill holes on wall. 2. Insert 1 plastic anchor (L) into hole on wall. 3. Attach bracket (O) to plastic anchor (L) by inserting 1 screw (Q) through hole on bracket (O), then tighten to plastic anchor (L) in wall. 4. Attach another bracket (O) to back of middle rear board (3) by inserting 1 screw (J) through hole on bracket (O), then tighten to back of middle rear board (3). STEP 17 1.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. WARNING Please make sure your item is secured to the wall, per assembly instructions.
Enjoy your new RiverRidge® Cabinet! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com RiverRidge® is a registered trademark of Sourcing Solutions, Inc.
