Installation Guide

ManualsBrandsRiverRidge Home ManualsFurnitureWoodbury Weathered Wood Hall Tree with Bench

ASSEMBLY INSTRUCTIONS

RiverRidge

Woodbury Hall Tree with Bench

ITEM #: 16-029

ADULT ASSEMBLY REQUIRED

This product requires assembly by an adult because of small parts. Care should be taken

in unpacking and assembling this item to keep small parts away from children. During assembly

children should be kept away from the product due to possible risk of injury.

WARNING SEE FULL WARNING ON PAGE 2

Young children can be seriously injured or killed if furniture tips over. Don’t use

this item for a TV stand or place heavy objects on top of item. Always use

angle-braces or anchors to secure furniture to the wall.

Summary of content (15 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS RiverRidge® Woodbury Hall Tree with Bench ITEM #: 16-029 ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. During assembly children should be kept away from the product due to possible risk of injury. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over.
PAGE 2
THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF AND CUBBY FOR TOTAL OF 80 POUNDS. BENCH SEATING WEIGHT CAPACITY IS 200 POUNDS. DO NOT LOAD SHELVES OR CUBBIES WITH MORE THAN 20 POUNDS OR SEATING WITH MORE THAN 200 POUNDS. OVERLOADING WITH MORE THAN 20 POUNDS PER SHELF OR 200 POUNDS SEATING MAY CAUSE DAMAGED TO THE SHELF OR SERIOUS INJURY OR DEATH.
PAGE 3
PARTS LIST NO QTY DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 2PCS 2PCS 1PC 4PCS Upper Rear Board Upper Shelf Middle Rear Board Vertical Support Board Lower Rear Board Top Board Cross Bar Shelf Divider Board Bottom Board Upper Left Side Panel Upper Right Side Panel Lower Left Side Panel Lower Right Side Panel Door Upper Back Board Lower Back Board Metal Leg
PAGE 4
NO A B C D E F G PART PARTS LIST QTY DESCRIPTION 14PCS Cam Bolt 14PCS Cam Lock 38PCS Wood Dowel 8PCS Screw (4x35mm) 8PCS Machine Screw (6x30mm) 8PCS Washer 4PCS Hinge H 24PCS Screw (4x14mm) I J K L M N O P Q 3PCS Coat Hook 7PCS Screw (3x12mm) 34PCS Screw (2.
PAGE 5
STEP 1 1. Screw 3 cam bolts (A) into cam bolt holes on upper left side panel (11). 2. Screw 3 cam bolts (A) into cam bolt holes on upper right side panel (12). STEP 2 1. Screw 4 cam bolts (A) into cam bolt holes on top board (6). STEP 3 1. Screw 4 cam bolts (A) into cam bolt holes on lower left side panel (13) and lower right side panel (14).
PAGE 6
STEP 4 1. Insert 4 wood dowels (C) into wood dowel holes on vertical support board (4). 2. Attach middle rear board (3) and lower rear board (5) to vertical support board (4) by inserting wood dowels (C) into wood dowel holes on middle rear board (3) and lower rear board (5). STEP 5 1. Insert 8 wood dowels (C) into wood dowel holes on upper right side panel (12). 2.
PAGE 7
STEP 6 1. Insert 8 wood dowels (C) into wood dowel holes on upper left side panel (11). 2. Attach upper left side panel (11) to upper rear board (1), upper shelf (2), middle rear board (3) and lower rear board (5) by inserting wood dowels (C) into wood dowel holes and insert cam bolts (A) into cam lock holes on upper rear board (1), upper shelf (2), middle rear board (3) and lower rear board (5). 3.
PAGE 8
STEP 8 1. Insert 2 wood dowels (C) into wood dowel holes on top board (6). 2. Attach top board (6) to upper left side panel (11) and upper right side panel (12) by inserting wood dowels (C) into wood dowel holes on upper left side panel (11) and upper right side panel (12). 3. Insert 4 screws (D) through holes on top board (6), then tighten to upper left side panel (11) and upper right side panel (12). STEP 9 1.
PAGE 9
STEP 10 1. Insert 2 wood dowels (C) into wood dowel holes on divider board (9). 2. Attach divider board (9) to shelf (8) by inserting wood dowels (C) into wood dowel holes on shelf (8). 3. Insert 6 wood dowels (C) into wood dowel holes on bottom board (10). 4. Attach bottom board (10) to lower left side panel (13), lower right side panel (14) and divider board (9) by inserting wood dowels (C) into wood dowel holes on lower left side panel (13), lower right side panel (14) and divider board (9). 5.
PAGE 10
STEP 12 1. Insert 4 wood dowels (C) into wood dowel holes on top board (6). 2. Place cross bar (7) onto grooves on lower left side panel (13) and lower right side panel (14). 3. Attach pre-assembled upper section to pre-assembled lower section by inserting wood dowels (C) into wood dowel holes and inserting cam bolts (A) into cam lock holes on lower left side panel (13) and lower right side panel (14). 4.
PAGE 11
STEP 13 1. Attach lower back board (17) to back of cabinet by inserting 10 screws (K) through holes on lower back board (17), then tighten to back of cabinet. STEP 14 1. Attach 2 hinges (G) to door (15) by inserting 4 screws (H) through holes on hinges (G), then tighten to door (15). 2. Attach handle (M) to door (15) by inserting 2 machine screws (N) through holes on door (15), then tighten to handle (M). 3. Repeat above steps for another door (15).
PAGE 12
STEP 15 Door Adjustments 1. Attach 1 door (15) to cabinet by inserting 8 screws (H) through holes on hinges (G), then tighten to lower left side panel (13). 2. Attach 1 door (15) to cabinet by inserting 8 screws (H) through holes on hinges (G), then tighten to lower right side panel (14). 3. Attach 3 coat hooks (I) to middle rear board (3) by inserting 6 screws (J) through holes on coat hooks (I), then tighten to middle rear board (3). 4.
PAGE 13
STEP 16 1. Attach 1 bracket (O) to back of middle rear board (3) by inserting 1 screw (J) through hole on bracket (O), then tighten to back of middle rear board (3). Option #1: Securing to Drywall 1. According to height of bracket (O) on back of middle rear board (3), screw 1 plastic anchor (L) into wall. 2. Place hall tree against wall, insert 1 screw (Q) through hole on bracket (O), then tighten to plastic anchors (L). Option #2: Securing to Drywall and Wood Stud 1.
PAGE 14
STEP 17 1. Place hall tree against wall and close to bracket (O). 2. Insert plastic lock strap (P) through hole on bracket (O) on hall tree, then through hole on bracket (O) on wall and fasten plastic lock strap (P) to fix 2 brackets (O) firmly together. ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children.
PAGE 15
Enjoy your new RiverRidge® Hall Tree! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States. If purchased outside of the United States, please contact retailer where purchased. RiverRidge® is a registered trademark of Sourcing Solutions, Inc.