Instructions / Assembly

STEP 1

1. Insert 2 wood dowels (A) into holes on top of one bottom support board (8), insert 2 wood

dowels (A) into holes on top of another bottom support board (8).

2. Attach one bottom support board (8) to bottom side of bottom board (4) by inserting 2 wood

dowels into holes on bottom of bottom board (4).

3. Insert 2 screws (E) through 2 holes on bottom board (4) then tighten to bottom support board

(8) by using a Philips screwdriver.

4. Insert 2 screws (E) through another 2 holes on bottom board (4) then tighten to bottom board

(8) by using a Philips screwdriver.

STEP2：



STEP 2

1. Screw 4 cam bolts (B) into pre-threaded holes on bottom board (4) tighten up by using a

Philips screwdriver.

2. Attach 1 middle support panel (5) to bottom board (4) by inserting 2 cam bolts into cam lock

holes on middle support panel (5)

3. Insert 2 cam locks (C) into cam lock holes on middle panel (5) then rotate clockwise to secure

cam bolts in place

4. Repeat the above 2 steps for another middle support panel assembly.