Operator's Manual Two-Man Ladder Stands 15' 2-man 17' Double Buck Extreme Includes Model #'s: RE615, 17' Double Buck Extreme RE629, 15' 2-Man Ladder Stand Maximum Height - 17' (RE615) Maximum Height - 15' (RE629) Get parts online at www.HuntRiversEdge.com Maximum Field Rating - 500 lb., no more than 300 lb. per person Tree Diameter Range - 12" to 20" OMRELD003 Revised 03/24/11 © 2011 RETI. All Rights Reserved.
Operator's Manual Rivers Edge Two-Man Ladder Stands Rivers Edge Treestands are engineered with you the hunter in mind. We appreciate your purchase of one of our world class treestands. Follow these few simple instructions and your stand will provide you many years of trouble-free pleasure. Instructions should be kept in a safe place and reviewed at least annually.
Operator's Manual Rivers Edge Two-Man Ladder Stands Warnings warning DO NOT USE THIS PRODUCT UNTIL YOU HAVE WATCHED THE INCLUDED treestand safety DVD, UNDERSTAND IT AND PRACTICED THE TECHNIQUES FOR SAFE HUNTING DISCUSSED IN THIS DVD. YOU MUST ALWAYS USE THE PROVIDED FULL BODY HARNESS (FALL ARREST SYSTEM) THAT MEETS TMA STANDARDS WHILE USING THIS PRODUCT. SINGLE SAFETY BELTS AND CHEST HARNESSES ARE NO LONGER ALLOWED AND SHOULD NEVER BE USED.
Operator's Manual Rivers Edge Two-Man Ladder Stands FULL BODY HARNESS (FALL ARREST SYSTEM) ALL LADDER STYLE TreestandS INCLUDE A TREE BELT THAT MUST BE USED IN ACCORDANCE WITH THE FULL BODY HARNESS (FAS) SUPPLIED. For safety reasons, take time to read each section of these instructions for proper attachment, use and maintenance of this Full Body Harness (FAS). To ensure your personal safety, you must read these instructions before using this product.
Operator's Manual Rivers Edge Two-Man Ladder Stands USING YOUR FULL BODY HARNESS (FALL ARREST SYSTEM) PUTTING ON YOUR FULL BODY HARNESS 1. With the Full Body Harness (FAS) lying on the ground, familiarize yourself with all of its design and features. SEE FIGURE 1. 2. Loosen both leg straps to the maximum position and unthread the waist belt completely. Doing both of these actions will allow you to put the Full Body Harness (FAS) on easier. right shoulder left shoulder 3.
Operator's Manual Rivers Edge Two-Man Ladder Stands 6. Tighten and adjust each leg strap so they are tight to your legs, but not uncomfortably tight. SEE FIGURE 5. 7. Feed waist strap through waist strap adjustment slide. Tighten and adjust the waist strap so it is tight fit to your body, but not uncomfortably tight. SEE FIGURE 6. warning BE SURE THAT YOU ARE WEARING YOUR FULL BODY HARNESS (FAS) CORRECTLY. 8.
Operator's Manual Rivers Edge Two-Man Ladder Stands full body harness (fas) used with tree belt supplied with all ladder style treestands This is the primary attachment method when using a Full Body Harness (FAS). This method must be used while in your final hunting position with any type of treestand. This method must be done immediately upon reaching the foot platform of your ladder stand. 1.
Operator's Manual Rivers Edge Two-Man Ladder Stands warning IN CASE OF A FALL… DO NOT PANIC! This Full Body Harness (Fall Arrest System) is designed to prevent a fall to the ground. It will suspend you until you are able to return to your treestand or until help arrives. Using the included Suspension Relief Device (SRD) will help to maintain circulation in the legs and help mitigate the effects of hanging suspended with your weight resting on the leg straps of the Full Body Harness.
Operator's Manual Rivers Edge Two-Man Ladder Stands Always… • Be physically fit, mentally alert, and well rested before using this product. • Read and understand all instructions provided and warnings listed before each use and save for future reference. • Practice using at ground level first before using above ground. • For adult use only, Weight Range: Min-120 lbs. Max-300 lbs. • Inspect before each use for signs of wear and/or damage- never use a damaged product. Replace with new.
Operator's Manual Rivers Edge Two-Man Ladder Stands Always… INSPECTION AND MAINTENANCE SCHEDULE • Be physically fit, mentally alert, and well rested before using this product. For All Rivers Edge Products • Read, understand and follow all warnings and instructions before use and save for future reference. • Use the provided Full Body Harness (Fall Arrest System) that meets TMA standards immediately upon reaching foot platform. • • • • • Recommended for adult use only.
Operator's Manual Rivers Edge Two-Man Ladder Stands ASSEMBLY INSTRUCTIONS (RE615) 1/4-20 x 2-1/2" bolts Tools needed – two 7/16" wrenches IMPORTANT ASSEMBLY TIP: Do not tighten any nut and bolt combinations completely until all parts are assembled together! Finger tighten plus one turn of a wrench only! This will temporarily hold the lock nut on the bolt while helping alignment of all parts! After all parts are assembled together, all nut & bolt combinations must be completely tightened.
Operator's Manual Rivers Edge Two-Man Ladder Stands 6. Attach the tree blade frame (2ML127) to the inside, lower set of holes of the side seat support loops using (4) provided 1/4-20 x 2-1/4" bolts, locknuts, and steel washers. See figure 4. Press the (2) provided rubber bumper stops into top side holes of tree blade frame. See figure 4. rubber bumper stops locknuts steel washers 1/4-20 x 2" bolts backrest rail 7.
Operator's Manual Rivers Edge Two-Man Ladder Stands 10. Sections are assembled on the ground in the following order: bottom section (SL51 ladder); second section (SL52 ladder); third section (SL54 ladder); top section (assembled top platform section). SEE FINISHED 17’ DOUBLE BUCK EXTREME TWO-MAN LADDER. seat cushion 11. With all sections assembled together on ground, secure all sections together using (6) provided spring lock pins.
Operator's Manual Rivers Edge Two-Man Ladder Stands FINISHED 17’ DOUBLE BUCK EXTREME 2-MAN LADDER ratchet straps top section third section 15' tie-off ropes 9' stabilizer bar rope second section stabilizer bar extension tube spring lock pins bottom section 14 Check for parts online at www.huntriversedge.
Operator's Manual Rivers Edge Two-Man Ladder Stands ladder PARTS 25 27 26 12 14 6 2 7 23 11 24 14 22 15 13 17 6 1 20 4 19 16 9 8 3 18 10 21 5 Check for parts online at www.huntriversedge.
Operator's Manual Rivers Edge Two-Man Ladder Stands ladder PARTS LIST NO EXTENSIONS AVAILABLE FOR THIS MODEL, TESTED FOR 17' MAXIMUM HEIGHT! KEY # PART # DESCRIPTION 1 48240B BOLT, HHCS GR5 BLK 1/4-20 X 1-1/2" QTY.
Operator's Manual Rivers Edge Two-Man Ladder Stands ASSEMBLY INSTRUCTIONS (RE629) side loop frames 1/4-20 X 2-1/4" bolts Tools needed – two 7/16” wrenches IMPORTANT ASSEMBLY TIP: DO NOT TIGHTEN NUT & BOLT COMBINATIONS COMPLETELY UNTIL ALL PARTS ARE ASSEMBLED TOGETHER! FINGER TIGHTEN ONLY PLUS ONE TURN OF A WRENCH ONLY! THIS WILL TEMPORARILY HOLD THE LOCK NUT ON THE BOLT WHILE HELPING ALIGNMENT OF ALL PARTS! AFTER ALL PARTS ARE ASSEMBLED TOGETHER, ALL NUT & BOLT COMBINATIONS MUST BE COMPLETELY TIGHTENED!
Operator's Manual Rivers Edge Two-Man Ladder Stands 5. Attach the platform support tube (411031) to the foot platform and seat platform using (2) provided 1/4-20 x 2-1/4” bolts, locknuts and steel washers. SEE FIGURE 3. 1/4-20 X 2-1/4" bolts tree blade weldment steel washers 6. Attach the tree blade extension tubes (411030) to the bottom side of the seat platform using (4) provided 1/4-20 x 2-1/4” bolts, locknuts and steel washers. SEE FIGURE 4. 7.
Operator's Manual Rivers Edge Two-Man Ladder Stands steel washers 9. Slide the (2) shooting rail J-pipes (411032) over the shooting rail straight tube (411027) and secure together using (2) provided 1/4-20 x 1-1/2" bolts and locknuts. SEE FIGURE 6. 10. Attach the previously assembled shooting rail to the tabs located on the shooting rail extension tubes using (2) provided 1/4-20 x 1-3/4” bolts, locknuts, steel washers and nylon washers. You must now tighten all nut and bolt combinations completely.
Operator's Manual Rivers Edge Two-Man Ladder Stands 14. Sections are assembled on the ground in the following order; bottom section (410032 ladder with assembled base extension); second section (410035 ladder with stabilizer bar mount); third section (410032 ladder); top section (assembled top platform section). Make sure assembled ladder sections have the steps positioned on the same side (outward) for climbing. SEE FINISHED 15’ 2-MAN LADDER. 15.
Operator's Manual Rivers Edge Two-Man Ladder Stands FINISHED 15’ 2-MAN LADDER STAND ratchet straps flared side rail long flared side rail 15' tie-off ropes third section 9' stabilizer bar rope second section stabilizer bar extension tube bottom section spring lock pins base extension rail tube base extension weldment Check for parts online at www.huntriversedge.
16 2 17 1 Operator's Manual 15 Rivers Edge Two-Man Ladder Stands 23 13 RE629 Parts Explosion 26 18 24 19 17 3 18 24 4 16 14 1 Top Ladder Parts 2 23 20 15 17 23 1321 26 14 24 20 23 20 25 19 3 22 12 21 24 4 18 2 20 22 6 12 17 1 20 25 23 18 2 5 12 6 1 20 23 5 7 12 11 127 10 6 11 Bottom Ladder Parts 12 10 6 8 9 8 22 9 Check for parts online at www.huntriversedge.
Operator's Manual Rivers Edge Two-Man Ladder Stands RE629 Parts List KEY # PART # 1 411021 DESCRIPTION Weldment platform 40" x 13" QTY. KEY # PART # DESCRIPTION QTY.
Operator's Manual Rivers Edge Two-Man Ladder Stands setup and USE INSTRUCTIONS 1. With assembled product lying on the ground in assembled position, position one person at bottom end of ladder lying on the ground. This person has to prevent the ladder end from tilting up when platform end is lifted and prevent the ladder from skidding across ground. 2. a.
Operator's Manual Rivers Edge Two-Man Ladder Stands 4. Standing on ladder step, lean toward tree with ratchet strap now in hand, Hook "S" hook with long strap through hole provided on tree blade. Feed the long strap through the center (slot) of ratcheting mechanism and back around through tightening lever. See figures 2 AND 3. NOTE: Be sure you feed the long strap correctly so there are no twists in the strap.
Operator's Manual Rivers Edge Two-Man Ladder Stands BOLT IDENTIFICATION CHART Not all bolt sizes shown are included with all treestands. Bolts shown are for size reference only. Extra hardware may be included in the parts bag.
Operator's Manual Rivers Edge Two-Man Ladder Stands NOTES _______________________________________________________________________________________________________ _______________________________________________________________________________________________________ _______________________________________________________________________________________________________ _______________________________________________________________________________________________________ _____________________________________
Rivers Edge Treestands, Inc. 1690 Elm Street, PO Box 755 Cumberland, WI 54829 800-450-EDGE (3343) | Fax 715-822-2124 Email: info@huntriversedge.com *All weights, specifications and features are approximate and are subject to change without notice. Due to continuous product improvements, product images may not be exact. Warning labels in some product images may have been removed for photography purposes only. Props shown in photos not included. Some assembly may be required.