Owner's manual

Replacement Strap Kit (RE760)
HuntRiversEdge.com
HuntRiversEdge.com
800-450-3343 • Fax [phone]
E-mail: [e-mail]
TREESTANDS
Rivers Edge Treestands are engineered with you the hunter in mind. We ap-
preciate your purchase of one of our world class accessories. Follow these few
simple instructions and your stand will provide you many years of trouble-free
pleasure. Instructions should be kept in a safe place and reviewed at least an-
nually.
If for any reason you have a problem with your product, DO NOT return to the
retailer, contact the Rivers Edge customer service department at 800-450-
EDGE (3343) for assistance.
ASSEMBLY INSTRUCTIONS
Tools needed – two 1/2" wrenches
IMPORTANT ASSEMBLY TIP: Do not tighten any nut and bolt combinations
until all parts are assembled. Finger tighten only. This will help alignment
of all parts!
1. Identify your treestand model by comparing it to FIGURE 1 OR FIGURE
2.
2. Attach the strap brackets onto the seat post or posts. SEE FIGURES 1 OR
2.
3. Tighten in place. Be sure not to over tighten or crush tubing when
tightening!
OMRE76008
Rev. 2/1/08
© 2008 Rivers Edge Treestands, Inc.
All Rights Reserved.
WARNING
READ, UNDERSTAND AND FOLLOW ALL ASSEMBLY,
INSPECTION, MAINTENANCE & USE INSTRUCTIONS
PROVIDED BEFORE EACH USE. FAILURE TO FOLLOW
ALL WARNINGS AND INSTRUCTIONS COULD RESULT
IN SERIOUS INJURY OR DEATH.
BE SURE TO FOLLOW ALL INSTRUCTIONS PROVID
-
ED. IF ANY INSTRUCTIONS ARE NOT UNDERSTOOD
OR IF YOU HAVE A PARTS ISSUE CALL 800-450-3343
BEFORE USING.
THIS REPLACEMENT STRAP ASSEMBLY IS DESIGNED
TO WORK ONLY ON RIVERS EDGE BANDIT, BIG FOOT,
AND LITE FOOT MODEL SERIES TREESTANDS. DO
NOT USE THIS REPLACEMENT STRAP ASSEMBLY ON
ANY OTHER BRAND OR PRODUCT.
BE SURE THE ASSEMBLY ORDER AND STRAP
BRACKET POSITIONS ARE EXACTLY THE SAME AS
FIGURE 1 OR FIGURE 2, DEPENDING ON YOUR MOD
-
EL. BE SURE TO USE ONLY THE CORRECT BOLT(S)
AND LOCKNUT(S) PROVIDED.
DOUBLE CHECK ASSEMBLY STEPS TO BE CERTAIN
YOU HAVE CORRECTLY ASSEMBLED THIS PROD
-
UCT.
DO NOT CRUSH TUBING WHEN TIGHTENING BOLT
ASSEMBLIES! IDENTIFY AND FAMILIARIZE YOURSELF
WITH ALL PARTS BEFORE YOU START.
INSTRUCTIONS SHOULD BE KEPT IN A SAFE PLACE
AND REVIEWED AT LEAST ANNUALLY.
FIGURE 2 - Big Foot/Lite Foot Strap Models
FIGURE 1 - Bandit Strap Model
washers
locknut
5/16-18 x 2-1/2" bolt
cables
cable end
5/16-18 locknut
washers
5/16-18 x 1-3/4" bolt