Spec Sheet
PRESSURE
PUMPS
The Premium Series FP25
pressure pumps feature high
volume and high head, thanks
to the large diameter closed-
impeller design.
The exhaust priming system
uses engine exhaust to draw a
partial vacuum in the pump
housing, for quicker pump
priming.
The electric start models are
typically installed on fire-fighting
brush trucks, where they are
wired into the truck electrical
system. Battery box and cables
are not included.
A convenient pressure gauge is
provided on the discharge
fitting. A rugged powder-coated
steel roll cage completes the
durable package.
FP25YFP25Y
FP25YFP25Y
FP25Y
FP25HFP25H
FP25HFP25H
FP25H
STANDARD
CENTRIFUGAL PUMPS
With a cast iron impeller and impeller housing, the S2 Standard
Centrifugal Pumps in the Premium Series can handle small
amounts of solids, up to about 10% of water volume. The steel
wear plate is easily serviced, and the roll cage holds up to tough
jobsite use. A lot of performance in a compact package.
www.riverside
pump
mfg.com 3888.696.9005
FP25VFP25V
FP25VFP25V
FP25V
S2S2
S2S2
S2
FP25FP25
FP25FP25
FP25
MODELMODEL
MODELMODEL
MODEL
FP25VFP25V
FP25VFP25V
FP25V
FP25HFP25H
FP25HFP25H
FP25H
FP25HEFP25HE
FP25HEFP25HE
FP25HE
FP25YFP25Y
FP25YFP25Y
FP25Y
FP25YEFP25YE
FP25YEFP25YE
FP25YE
S2BS2B
S2BS2B
S2B
S2HS2H
S2HS2H
S2H
UT# L1293Y L1610Z L1617Z L1625Z L1626Z L1532Z L1611Z
Ports 2.5" NPT Female 2.5" NPT Female 2.5" NPT Female 2.5" NPT Female 2.5" NPT Female 2" NPT 2" NPT
Max.Capacity 218 gpm 218 gpm 218 gpm 218 gpm 218 gpm 150 gpm 150 gpm
825 Lpm 825 Lpm 825 Lpm 825 Lpm 825 Lpm 568 Lpm 568 Lpm
49.5 m3/h 49.5 m3/h 49.5 m3/h 49.5 m3/h 49.5 m3/h 34.1 m3/h 34.1 m3/h
Max.Head 285 ft. 285 ft. 285 ft. 285 ft. 285 ft. 120 ft. 120 ft.
86.9 m 86.9 m 86.9 m 86.9 m 86.9 m 36.6 m 36.6 m
Max.Pressure 123 psi 123 psi 123 psi 123 psi 123 psi 52 psi 52 psi
8.5 bar 8.5 bar 8.5 bar 8.5 bar 8.5 bar 3.6 bar 3.6 bar
Length 27.6 in. 27.6 in. 27.6 in. 27.6 in. 27.6 in. 21.5 in. 21.5 in.
70.1cm 70.1cm 70.1cm 70.1cm 70.1cm 54.6 cm 54.6 cm
Width 24.0 in. 24.0 in. 24.0 in. 24.0 in. 24.0 in. 19.0 in. 19.0 in.
61.0 cm 61.0 cm 61.0 cm 61.0 cm 61.0 cm 48.3 cm 48.3 cm
Height 23 in. 23 in. 23 in. 23 in. 23 in. 20.8 in. 20.8 in.
58.4 cm 58.4 cm 58.4 cm 58.4 cm 58.4 cm 52.8 cm 52.8 cm
Net Weight 131 lbs. 128 lbs. 134 lbs. 166 lbs. 178 lbs. 82 lbs. 80 lbs.
59.4 kg 58.1 kg 60.8 kg 75.3 kg 80.7 kg 37.2 kg 36.3 kg
ENGINE -ENGINE -
ENGINE -ENGINE -
ENGINE -
Manufacturer Briggs&Stratton Honda Honda Yanmar Yanmar Briggs&Stratton Honda
Model Vanguard OHV GX390 GX390 L100V Diesel L100V Diesel Industrial Plus GX160
Starting Recoil Recoil Recoil & Electric Recoil Recoil & Electric Recoil Recoil
Power 13 hp 13 hp 13 hp 9.1 hp 9.1 hp 3.5 hp 5.5 hp
9.7 kW 9.7 kW 9.7 kW 6.8 kW 6.8 kW 2.6 kW 4.1 kW
Fuel Cap. 8.3 qts. 6.9 qts. 6.9 qts. 5.0 qts. 5.0 qts. 4.0 qts. 3.8 qts.
7.9 L 6.5 L 6.5 L 4.7 L 4.7 L 3.8 L 3.6 L
Run Time at Max 1.7 hrs. 1.6 hrs. 1.6 hrs. 2.1 hrs. 2.1 hrs. 2.6 hrs. 2.1 hrs.
PUMP -PUMP -
PUMP -PUMP -
PUMP -
Impeller Aluminum, Large Diameter Closed Impeller, Stainless Steel Bushing Cast Iron 3-Vane
Volute Sand-Cast Aluminum Pump Body Cast Iron Impeller Housing
Housing Sand-Cast Aluminum End Housing Sand Cast Aluminum
Roll Cage Rugged 1" Diameter Steel, Powder-Painted 1" Dia. Steel, Powder-Painted
Vibration Isolation Six (6) Rubber Isolators Four (4) Rubber Isolator Feet
S2BS2B
S2BS2B
S2B
S2HS2H
S2HS2H
S2H