Alcatel-Lucent OmniAccess Wireless LAN Access Point Family OAW-AP41, OAW-AP60, OAW-AP61, OAW-AP65, OAW-AP70, OAW-AP80
Alcatel-Lucent OmniAccess access points (APs) are small, lightweight and can be securely deployed in a variety of locations such as on walls, cubicles, desktops, and in the ceiling. The AP antenna diversity allows for the best possible signal processing using dual, omni-directional antennas.
Alcatel-Lucent OmniAccess access points (APs) are small, lightweight and can be securely deployed in a variety of locations such as on walls, cubicles, desktops, and in the ceiling. The AP antenna diversity allows for the best possible signal processing using dual, omni-directional antennas.
ADAPTIVE RF MANAGEMENT (ARM), RF PLANNING, DYNAMIC C A L I B R AT I O N , A N D A D VA N C E D T R O U B L E S H O O T I N G With previous generations of WLAN technology, AP deployment was an expensive proposition. Corporations had to painstakingly undertake extensive RF planning, complete site surveys, climb into ceilings to run new cabling, and mount the APs. In turn, APs were deployed sparingly.
In addition, the Alcatel-Lucent OmniAccess Wireless system uniquely provides automatic tuning of the mobile environment through sophisticated system calibration and distributed, radio resource allocation technologies. ARM and Alcatel-Lucent OmniAccess Aps constantly scan the ambient radio environment to determine coverage holes, interference, and congestion.
ZERO CONFIGURATION, PLUG-AND-PLAY DEPLOYMENT Alcatel-Lucent OmniAccess APs are completely plug-and-play, requiring no manual configuration. 6 Alcatel-Lucent | OmniAccess AP Alcatel-Lucent OmniAccess APs can The WLAN switch automatically be attached to any existing Ethernet configures each OmniAccess AP switch or IP router and across any based on the policies and subnet boundary. Once connected, configurations set by the the APs self configure by administrator.
UNPARALLELED SECURITY Acting as an air monitor, the Alcatel-Lucent OmniAccess APs deliver 100 Mbps of intrusion analysis and relays alerts back to the OmniAccess WLAN switch. Alcatel-Lucent OmniAccess APs detect and thwart rogue APs and wireless intrusions such as DoS and man-inthe-middle attacks. Since the OmniAccess WLAN switch manages Alcatel-Lucent’s OmniAccess APs, no critical configuration information – such as passwords, encryption keys, or digital certificates – is stored on the APs.
SECURE REMOTE OFFICE DEPLOYMENT Alcatel-Lucent OmniAccess APs can be securely deployed in a remote office, letting network managers easily extend their corporate 802.1X framework across the Internet. Alcatel-Lucent OmniAccess APs use the industry standard IPSec protocol to create secure tunnels that connect APs to a central OmniAccess WLAN switch.
The Alcatel-Lucent OmniAccess AP Family ALCATEL-LUCENT OMNIACCESS AP41 The Alcatel-Lucent OmniAccess AP41 is a single radio, multi-band (802.11 a/b/g) thin access point. The OmniAccess AP41 has an internal antenna and can be deployed via wall jacks in the user space. It is powered by standards compliant PoE (power-over-Ethernet). The OmniAccess AP41 is designed for cost-sensitive applications below the ceiling and is ideal for dense deployments in user space serving a mix of 802.11 a, b and g clients.
ALCATEL-LUCENT OMNIACCESS AP65 The Alcatel-Lucent OmniAccess AP65 (OAW-AP65) is Alcatel-Lucent’s smallest, dual-radio thin architecture access point that provides concurrent operation of 802.11a and 802.11b/g services. Designed for use exclusively with OmniAccess WLAN switches, with its rear mounted Ethernet interface and integrated ceiling tile rail mounting point, the OAW-AP65 self contained, low-profile design is ideally suited for discrete deployment applications.
P R O D U C T F E AT U R E S A N D B E N E F I T S ALCATEL-LUCENT OMNIACCESS AP41 Remote AP for home office/low-cost deployments n Supports 802.11a or b/g n Configurable as AP, air monitor, or both simultaneously n Internal omni-directional high-gain antennas with 180-degree rotation n 802.3af-compliant power-over-Ethernet (PoE) ALCATEL-LUCENT OMNIACCESS AP60 AND AP61 Indoor enterprise deployments with single radio usage requirements n Supports 802.11a or b/g n 802.
P R O D U C T F E AT U R E S A N D B E N E F I T S ALCATEL-LUCENT OMNIACCESS AP65 Indoor enterprise deployments with aesthetic/discreetness requirements with multi-radios n Supports 802.11a or b/g n Plenum rated n Two integral tri-band omni-directional high- n Kensington lock interface gain antennas with 90-degree movement n Antenna diversity n 802.
Technical Specifications Antenna Specifications Radio Specifications OAW-AP41 INTEGRAL • Single, integral, tri-band, omni-directional antenna with articulating movement. • Non-detachable 802.11A Antenna Specifications Gain: • 2.4-2.5 GHz / 2.11 dBi • 4.900 GHz ~ 5.850 GHz / 2.07 dBi • VSWR 1.5:1 OAW-AP60 EXTERNAL • Dual, diversity supporting reverse polarity SMA (RP-SMA) detachable antenna interfaces suitable for single or tri-band detachable antennas of various pattern types and gains.
802.11g Frequency bands • 2.412 ~ 2.462 GHz (USA, Canada) • 2.412 ~ 2.472 GHz (ETSI) • 2.412 ~ 2.484 GHz (Japan) Radio technology • OFDM Modulation type • CCK, BPSK, QPSK, 16-QAM, 64-QAM Transmit power • Configurable by system administrator MAC • CSMA/CA with ACK Operating channels • US and Canada: 11 • ETSI: 13 • Japan: 14 Data rates 6, 9, 12, 18, 24, 36, 48, 54 Mbps per channel OAW-AP41 RADIO SPECS 5GHZ – IEEE 802.11A Frequency Bands Supported • 5.150 ~ 5.250 GHz (low band), country specific • 5.250 ~ 5.
OAW-AP65 RADIO SPECS 5GHZ - IEEE 802.11A Frequency Bands Supported • 5.150 ~ 5.250GHz (low band), country specific • 5.250 ~ 5.350GHz (mid band), country specific • 5.470 ~ 5.725GHz (Europe), country specific • 5.725 ~ 5.
RADIO SPECS – 2.4GHZ - IEEE 802.11B Frequency Bands Supported • 2.400 ~ 2.4835/2.
OAW-AP65 • 1 x 10/100 Base-TX (RJ-45) auto-sensing Ethernet interface • Auto-sensing MDI/MDX • PoE 48VDC / 220mA power over Ethernet (802.3af compliant) • Supports Serial over Ethernet • Rear Mounted • 1 x 5V DC External Power Interface OAW-AP70 • 2 x 10/100BaseTX RJ-45 auto-sensing Ethernet interfaces (Port 0) • Auto-sensing MDI/MDX • PoE 48V DC / 250mA power over Ethernet (802.3af compliant) • Serial over Ethernet (Port 1) • Auto-sensing MDX • PoE 48V DC / 250mA power over Ethernet (802.
Environmental Requirements OAW-AP41, AP60, AP61, AP65 AND OAW-AP70 Temperature • Operating: 0 to 50º C (32 to 122º F) • Storage: 0 to 70º C (32 to 158º F) Humidity • 5% to 95% (non-condensing) OAW-AP80 Temperature • Operating: -30 to 55 ºC (-22 to 131 ºF) • Storage: -40 to 80 ºC (-40 to 176 ºF) Humidity • 0% - 95% (non-condensing) Survival Wind Speed • 201 Km/hr / 125 mph Standards OAW-AP41 AND AP65 • Ethernet IEEE 802.3 / IEEE 802.3u • Wireless IEEE 802.11a/b/g • IEEE 802.
Ordering information OAW-AP41 OmniAccess AP41 access point with single Integral Tri-Band Antenna. Supports 802.11a or 802.11b/g (SW selectable). Supports one 10/100 Base-T (RJ-45) Ethernet Interface (Power over Ethernet capable) and Installation Guide. OAW-AP60 OmniAccess AP60 access point with dual RP-SMA external antenna connectors (supports diversity). Supports 802.11a or 802.11b/g (SW selectable).
Alcatel-Lucent OmniAccess Wireless LAN Access Point Family OAW-AP41, OAW-AP60, OAW-AP61, OAW-AP65, OAW-AP70, OAW-AP80 Alcatel, Lucent, Alcatel-Lucent and Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. © 2007 Alcatel-Lucent. All rights reserved. P/N 031669-00 Rev D 7/07 www.alcatel-lucent.