- Riverstone Switch Router Getting Started Guide

Riverstone Networks RS 2100 Switch Router Getting Started Guide 4-19
RS 2100 Initial Configuration Setting the DNS Domain Name and Address
7. Exit Configure mode, then enter the system show dns command to verify the new DNS settings:
Here is an example:
8. Use the ping command to verify that the RS can resolve the DNS server name into its IP address:
Here is an example:
rs# system show dns
DNS domain: mrb.com, DNS server(s): 16.50.11.12
rs#
ping rs
PING rs.mktg.mrb.com (16.50.11.22): 56 data bytes
64 bytes from 16.50.11.22: icmp_seq=0 ttl=255 time=0 ms
--- rs.mktg.mrb.com ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 0/0/0 ms