Use and Care Manual

Page 21
Pull the polyfilm over the greenhouse, attach the side
without the curtain at the groundrail first. Pull the
polyfilm tight and secure it at the eave on the curtain
side.
Note: DO NOT cut the polyfilm at the eave, the
curtain and the roof poly are the same piece.
Lay the curtain rod in the curtain channel on top of the
polyfilm with the wire lock base pointing up.
Fold the poly film up so you can lock the polyfilm to
the crank rod using the wiggle wire. Be sure the crank
rod lays flat in the curtain channel while you are
locking the polyfilm in place.
NOTE:
Be sure to position the crank rod so that
the swedged will iinsert into the crank handle
After you are certain
you have the polyfilm properly
locked in place cut the polyfilm and attach the piece
you cut off to the bottom knee wall
NOTE:
It is easier if you start from the center and
work to the ends when locking poly into place.
Bottom Knee Wall