Use and Care Manual

ATTACHING 1" X 1" ANGLE AROUND BASE
Identify and attach the 1"x 1" aluminum angle. This 1" aluminum angle lies
over the 2" x 3" Aluminum Base Angle (ABA) and against the P.C.S.S. at
the base of the structure.
Attach using 5/16" x 1-1/4" tek-screws approximately 24" apart.
Lap each section of 1" x 1" approximately 2" to 3" as you continue around
the perimeter of the structure.
Use the same process for notching the corners as you did with the 2" x 3"
ABA.
2" to 3"
Lap
5/16" x 1-1/4"
Tek-Screws
Approximatley
24" Apart
2" x 3"
1" x 1"
2" x 3"
Base
Angle
1" x 1"
Base
Angle
Page 28