Nitro Dragster Exploded View

2103 NITRO DRAGSTER KIT

1013 NITRO DRAGSTER BODY

2501 1.5” O-RING FRONTS (BLACK)

2510 1.5 WIDE REAR TIRES, STD.

5031 CHASSIS WITH BRACE

5131 NITRO SUB FRAME

5140 NITRO BOTTOM PLATE

5141 NITRO AXLE MOUNT PLATE (2)

5142 THROTTLE PLATE

5143 NITRO TANK PLATE

5144 ALUMINUM ENGINE MOUNTS (2)

5146 THROTTLE PLATE SUPPORTS (2)

5221 1/8 E-CLIP

5238 FRONT AXLE PLATE

5282 ANGLE BRACKET,TAPPED(4)

5311 SET SCREW HUB

5312 GEAR / WHEEL HUB

5351 STEERING BLOCKS (2)

5363 E-CLIP AXLE,.825 LONG (2)

5747 REAR AXLE, STAINLESS STEEL

HARDWARE

1- 4-40 X 1/4 BUTTON HEAD SCREW

2- 4-40 X 3/8 BUTTON HEAD SCREW

3- 4-40 X 5/8 BUTTON HEAD SCREW

4- 4-40 HEX NUT

5- 4-40 LOCK NUT

6- 10-32 SOCKET SET SCREW

7- 1” BODY POST

8- 64 TOOTH 32P GEAR

9 - 1/4 X 3/8 BUSHING

10– 5-40 X 3/8 BUTTON HEAD SCREW

5031

5131

5140

5142

5143

5144

5146

5238

5282

5311

5312

5351

5363

5747

PAGE 1
2103 NITRO DRAGSTER KIT 8 1013 2501 2510 5031 5131 5140 5141 5142 5143 5144 5146 5221 5238 5282 5311 5312 5351 5363 5747 NITRO DRAGSTER BODY 1.5” O-RING FRONTS (BLACK) 1.5 WIDE REAR TIRES, STD. CHASSIS WITH BRACE NITRO SUB FRAME NITRO BOTTOM PLATE NITRO AXLE MOUNT PLATE (2) THROTTLE PLATE NITRO TANK PLATE ALUMINUM ENGINE MOUNTS (2) THROTTLE PLATE SUPPORTS (2) 1/8 E-CLIP FRONT AXLE PLATE ANGLE BRACKET,TAPPED(4) SET SCREW HUB GEAR / WHEEL HUB STEERING BLOCKS (2) E-CLIP AXLE,.
PAGE 2
IMPORTANT ENGINE , CLUTCH, AND EXHAUST INFORMATION BELOW ARE RECOMMENDED CLUTCH AND EXHAUST SYSTEMS TO USE DEPENDING ON THE ENGINE YOU HAVE CHOSEN. WE ARE SURE THAT THERE ARE MORE , BUT THESE SHOULD BE EASILY OBTAINABLE. THE BEST WAY IS TO GO WITH A SHORT SHAFT SETUP. THIS STYLE CLUTCH IS THE SHORTEST, LEAVING THE MOST ROOM FOR CONNECTING YOUR HEADER TO A REAR EXHAUST ENGINE.